Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Grilamid TRVX-50X9 black 9230 - PAMACM12-GF50 - EMS-GRIVORY | a unit of EMS-CHEMIE AG

Material Data Center offers the following functions for Grilamid TRVX-50X9 black 9230:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Grilamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
Product-nomenclature: ISO 16396-PA MACM12 X,GF50,M1H,C12-120

 

Markets

  Automotive
  Automotive electr. and electronics, lighting, Cooling and climate control, Powertrain and Chassis
  Electricals & Electronics
  Electrical appliances, Electrical equipment, Energy distribution,
Mobile phones and other portable devices
  Industry & Consumer goods
  Heating systems, Housewares, Hydraulics & Pneumatics, Mechanical Engineering, Medical devices,
Power transmission, Tools & Accessories
Caratteristiche Fisichesecco/condUnitáNorma del test
ISO Data
Ritiro di stampaggio, parallelo 0.1 / * % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 0.1 / * % ISO 294-4, 2577
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione 13000 / 12500 MPa ISO 527
Carico unitario a rottura 170 / 160 MPa ISO 527
Deformazione a rottura 2 / 2 % ISO 527
Resistenza all'urto Charpy, +23°C 65 / 65 kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C 60 / 60 kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C 16 / 16 kJ/m² ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C 15 / 15 kJ/m² ISO 179/1eA
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di transizione vetrosa, 10°C/min 125 / * °C ISO 11357-1/-2
Temp.di inflessione sotto carico, 1.80 MPa 115 / * °C ISO 75-1/-2
Temp.di inflessione sotto caricor, 8.00 MPa 105 / * °C ISO 75-1/-2
Coeff.di dilatazione termica lin., parallelo 20 / * E-6/K ISO 11359-1/-2
Coeff.di dilatazione termica lin., perpend. 80 / * E-6/K ISO 11359-1/-2
Reazione al fuoco a spessore h HB / * class IEC 60695-11-10
Spessore provato 0.8 / * mm -
Proprietà Elettrichesecco/condUnitáNorma del test
ISO Data
Resistività volumica 1E9 / 1E11 Ohm*m IEC 62631-3-1
Resistività superficiale * / 1E12 Ohm IEC 62631-3-2
Rigidità dielettrica 40 / 40 kV/mm IEC 60243-1
Res. Alle correnti striscianti superficiali - / 600 - IEC 60112
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'acqua 1.3 / * % Sim. alla ISO 62
Assorbimento d'umidità 0.6 / * % Sim. alla ISO 62
Massa volumica 1500 / - kg/m³ ISO 1183
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Granuli, Nero
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.