Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ferrex GPP20CC66HB - PP-K20 - LyondellBasell Industries

Material Data Center offers the following functions for Ferrex GPP20CC66HB:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ferrex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Indice di fluidità a caldo, MFI 12 g/10min ASTM D 1238
Temperatura 230 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Resistenza alla trazione di snervamento 30.3 MPa ASTM D 638
Allungamento a rottura 25 % ASTM D 638
Modulo a flessione 2213 MPa ASTM D 790
Gardner urto 9.6 J ASTM D 2794,4226,5420
Resistenza all'urto Izod con intaglio, 1/8 in 42.7 J/m ASTM D 256
Resistenza all'urto Izod, 1/8 in 907 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
DTUL a 66 psi 116 °C ASTM D 648
DTUL a 264 psi 62.8 °C ASTM D 648
Altre ProprietàValoreUnitáNorma del test
Densità 1090 kg/m³ ASTM D 792
Caratteristiche
Forma fisica disponibile
Pellet
Caratteristiche
High Gloss, Omopolimero
Disponibilità geografica
Nord America, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.