Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DuraForm® ProX® PA Plastic - PA12 - 3D Systems Corporation

Material Data Center offers the following functions for DuraForm® ProX® PA Plastic:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Duraform datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Modulo a trazione 1793 MPa ASTM D 638
Resistenza alla trazione 45 MPa ASTM D 638
Resistenza alla trazione a rottura 47 MPa ASTM D 638
Allungamento a snervamento 14 % ASTM D 638
Allungamento a rottura 22 % ASTM D 638
Modulo a flessione 1655 MPa ASTM D 790
Resistenza alla flessione 63 MPa ASTM D 790
Durezza D Shore 73 - ASTM D 2240
Resistenza all'urto Izod con intaglio, 1/8 in 44.8 J/m ASTM D 256
Resistenza all'urto Izod, 1/8 in 646 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
UL 94 combustibilitá HB - UL 94
Spessore testati 3.05 mm -
DTUL a 66 psi 182 °C ASTM D 648
DTUL a 264 psi 97.2 °C ASTM D 648
Other Standards[S]
coefficiente d’espansione termica, lung. 110 E-6/K ASTM E 831
Temperatura specifica 985 J/(kg K) ASTM E 1269
S: These properties are reported by the producer according standards that are different to our defaults.
Proprietà ElettricheValoreUnitáNorma del test
ASTM Data
Rigidità elettrica, breve periodo di tempo 15.2 kV/mm ASTM D 149
Resistenza superficiale 4.66E15 Ohm ASTM D 257
Resistenza di volume 1.46E15 Ohm*cm ASTM D 257
Altre ProprietàValoreUnitáNorma del test
Densità 950 kg/m³ ASTM D 792
Caratteristiche
Processabilità e Forma di Forni
Additive Manufacturing
Forma fisica disponibile
Polveri, Bianco
Certifications
Grado medico, Biocompatibility ISO 10993
Applicazioni
Aereo e aerospaziale, Automotive, Elettrotecnica ed electrici, Medicale
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.