Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Desmopan 9392A - TPU - Covestro Deutschland AG

Check here, which other Desmopan datasheets, application examples or technical articles are available in Material Data Center

Proprietà Meccaniche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione - Funzioni

Any use of this information falls under the rules of our disclaimer.

Testo del prodotto

• Extrusion- and injection molding grade
• very good hydrolysis and microbial resistance
• good low-temperature flexibility
  Application:
• Hoses, non-reinforced
• Cable sheathings
• Profiles
• Technical parts

Proprietà Meccaniche	Valore	Unitá	Norma del test
ISO Data
Carico Unitario al 10% di allungamento	3.8	MPa	ISO 527
Carico Unitario al 100% di allungamento	10.6	MPa	ISO 527
Carico Unitario al 300% di allungamento	20	MPa	ISO 527
Carico Unitario a rottura TPE	49	MPa	ISO 527
Allungamento a rottura TPE	>300	%	ISO 527
Deformazione residua dopo compressione a 70°C, 24h	56	%	ISO 815
Resistenza alla lacerazione	85	kN/m	ISO 34-1
Resistenza all'abrasione	25	mm³	ISO 4649
Durezza Shore A	92	-	ISO 7619-1
Durezza Shore D	42	-	ISO 7619-1

Altre Proprietà	Valore	Unitá	Norma del test
Massa volumica	1150	kg/m³	ISO 1183

Raccomandazione de Processabilità Stampaggio ad Iniezione	Valore	Unitá	Norma del test
Pre-essiccamento - Temperatura	80	°C	-
Pre-essiccamento - Tempo	1 - 2	h	-
Umidità del Processo	≤0.05	%	-
Temperatura di fusione	210 - 230	°C	-
Temperatura dello stampo	20 - 40	°C	-

Funzioni

Caratteristiche

Processabilità e Forma di Forni

Stampaggio ad Iniezione, Estrusione Profilati, Estrusione di Lastre/Fogli, Altre Estrusioni

Disponibilità geografica

Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa

Altre informazioni

Stampaggio ad Iniezione

PREPROCESSING
Max. water content: 0.05 %
Max. drying temperature: 80 °C
Drying time:
Dry air dryer 1-2 h

PROCESSING
Melt temperature: 210-230 °C
Mold temperature: 20-40 °C

Altre Estrusioni

 Preprocessing

Max. Water content	≤0.05 %
Drying temperature	70-110 °C
Dry air dryer	1-2 h

 Processing

Melt temperature

195-215 °C

Estrusione di Profilati

 Preprocessing

Max. Water content	≤0.05 %
Drying temperature	70-110 °C
Dry air dryer	1-2 h

 Processing

Melt temperature

195-215 °C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.