Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Desmopan 3860D - (TPU+ABS) - Covestro Deutschland AG

Check here, which other Desmopan datasheets, application examples or technical articles are available in Material Data Center

Proprietà Meccaniche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione - Funzioni

Any use of this information falls under the rules of our disclaimer.

Testo del prodotto

• Injection molding grade
• modified with ABS
• good low-temperature flexibility
• good wear resistance
  Application:
• Ski boot shells
• Injection molded engineering parts

Proprietà Meccaniche	Valore	Unitá	Norma del test
ISO Data
Modulo a flessione, 23°C	230	MPa	ISO 178
Carico Unitario al 10% di allungamento	13	MPa	ISO 527
Carico Unitario al 100% di allungamento	25	MPa	ISO 527
Carico Unitario al 300% di allungamento	44	MPa	ISO 527
Carico Unitario a rottura TPE	52	MPa	ISO 527
Allungamento a rottura TPE	>300	%	ISO 527
Resistenza a trazione	52	MPa	ISO 37
Deformazione a rottura	430	%	ISO 37
Deformazione residua dopo compressione a 70°C, 24h	59	%	ISO 815
Resistenza alla lacerazione	175	kN/m	ISO 34-1
Resistenza all'abrasione	39	mm³	ISO 4649
Durezza Shore D	59	-	ISO 7619-1

Altre Proprietà	Valore	Unitá	Norma del test
Massa volumica	1200	kg/m³	ISO 1183

Raccomandazione de Processabilità Stampaggio ad Iniezione	Valore	Unitá	Norma del test
Pre-essiccamento - Temperatura	100 - 110	°C	-
Temperatura di fusione	235 - 245	°C	-
Temperatura dello stampo	40 - 50	°C	-

Funzioni

Caratteristiche

Processabilità e Forma di Forni

Stampaggio ad Iniezione

Caratteristiche speciali

Alto urto o modificato all'urto

Applicazioni

Attrezzature sportive

Disponibilità geografica

Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa

Altre informazioni

Stampaggio ad Iniezione

PROCESSING
Melt temperature: 235-245 °C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.