Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CirculenRenew C14 LD2420F - (PE-LD) - LyondellBasell Industries

Material Data Center offers the following functions for CirculenRenew C14 LD2420F:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Circulen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Ottiche - Altre Proprietà - Proprietà Meccaniche (Film) - Raccomandazione de Processabilità Estrusione
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 0.75 g/10min ISO 1133
Temperatura 190 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 260 MPa ISO 527
Carico unitario a trazione 11 MPa ISO 527
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 111 °C ISO 11357-1/-3
Temp.di rammollimento Vicat, A 96 °C ISO 306
Proprietà OtticheValoreUnitáNorma del test
ASTM Data
Brillantezza 90 - ASTM D 2457
Opacità 8 % ASTM D 1003
Altre ProprietàValoreUnitáNorma del test
Massa volumica 923 kg/m³ ISO 1183
Proprietà Meccaniche (Film)ValoreUnitáNorma del test
ISO Data
Carico massimo, parallel 26 MPa ISO 527-3
Carico massimo, perpend. 24 MPa ISO 527-3
Allungamento massimo, parallelo 300 % ISO 527-3
Allungamento massimo, perpend. 600 % ISO 527-3
Coefficiente attrito dinamico 0.8 - ISO 8295
Tipo di estrusione blown - -
Spessore del provino 0.05 mm -
Raccomandazione de Processabilità EstrusioneValoreUnitáNorma del test
Type of extrusion blown - -
Temperatura di fusione 170 - 220 °C -
Caratteristiche
Processabilità e Forma di Forni
Estrusione di film in bolla, Estrusione Film
Forma fisica disponibile
Pellet
Caratteristiche
Termosaldatura, Resistenza del fuso
Certifications
Contiene risorse rinnovabili, Contenuto di resina riciclata, Contatto con gli alimenti
Applicazioni
Polivalente, Imballaggio
Disponibilità geografica
Europa, Asia Oceano Pacifico, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.