Any use of this information falls under the rules of our
disclaimer.
Testo del prodotto
With wax.
Caratteristiche Fisiche | Valore | Unitá | Norma del test |
ISO Data |
Indice di Fluiditá, MFI |
7 |
g/10min |
ISO 1133 |
Temperatura |
200 |
°C |
- |
Carico |
5 |
kg |
- |
Ritiro di stampaggio, parallelo |
0.5 |
% |
ISO 294-4, 2577 |
Proprietà Meccaniche | Valore | Unitá | Norma del test |
ISO Data |
Resistenza a trazione |
27 |
MPa |
ISO 527 |
Modulo a flessione, 23°C |
1500 |
MPa |
ISO 178 |
Resistenza alla flessione |
34 |
MPa |
ISO 178 |
Resistenza all'urto Charpy, +23°C |
N |
kJ/m² |
ISO 179/1eU |
Resist. urto Charpy con intaglio, +23°C |
2 |
kJ/m² |
ISO 179/1eA |
Durezza Shore D |
68 |
- |
ISO 7619-1 |
Durezza Rockwell |
R 20 |
- |
ISO 2039-2 |
Proprietà Termiche | Valore | Unitá | Norma del test |
ISO Data |
Temp.di inflessione sotto carico, 1.80 MPa |
62 |
°C |
ISO 75-1/-2 |
Temp.di rammollimento Vicat, A |
81 |
°C |
ISO 306 |
Proprietà Ottiche | Valore | Unitá | Norma del test |
ISO Data |
Opacità |
1.2 |
- |
ISO 14782 |
Other Standards[S] |
Trasmissione luminosa |
88 |
% |
ISO 13468 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
Altre Proprietà | Valore | Unitá | Norma del test |
Assorbimento d'acqua |
0.1 |
% |
Sim. alla ISO 62 |
Massa volumica |
1020 |
kg/m³ |
ISO 1183 |
Raccomandazione de Processabilità Stampaggio ad Iniezione | Valore | Unitá | Norma del test |
Temperatura di fusione |
180 - 220 |
°C |
- |
Temperatura dello stampo |
50 |
°C |
- |
Zona 1 |
180 - 200 |
°C |
- |
Temperatura dell ugello |
200 |
°C |
- |
Pressione di Iniezione |
67 |
MPa |
- |
Contropressione |
6 |
MPa |
- |
Raccomandazione de Processabilità Estrusione | Valore | Unitá | Norma del test |
Temperatura dello stampo |
60 - 80 |
°C |
- |
Zona 1 |
170 |
°C |
- |
Zona 2 |
180 |
°C |
- |
Zona 3 |
185 |
°C |
- |
Zona 4 |
190 |
°C |
- |
Zona 5 |
200 |
°C |
- |
Temperatura dell ugello |
200 |
°C |
- |
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Altre Estrusioni
Caratteristiche
Miscela di resina, High Gloss, Copolimero
Certifications
Contatto con gli alimenti, Approvato per l'utilizzo per contatto con alimenti 10/2011, Approvato per l'utilizzo per contatto con alimenti secondo la FDA 21 CFR, Contatto con acqua potabile
Applicazioni
Imballaggio
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com