Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Moplen HP400H - PP - LyondellBasell Industries

Material Data Center offers the following functions for Moplen HP400H:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Moplen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés optiques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 2 g/10min ISO 1133
Température 230 °C -
Charge 2.16 kg -
ASTM Data
Indice de fluidité, MFI 2.1 g/10min ASTM D 1238
Température 230 °C -
Charge 2.16 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 1400 MPa ISO 527
Contrainte d'écoulement 34 MPa ISO 527
Déformation au seuil d'écoulement 11 % ISO 527
Déformation à la rupture >50 % ISO 527
Résistance au choc Charpy (entaillé), +23°C 8 kJ/m² ISO 179/1eA
Ball indentation hardness 70 MPa ISO 2039-1
ASTM Data
Module de traction d’élasticité 33 MPa ASTM D 638
Allongement d’élasticité 11 % ASTM D 638
Module de flexion 1450 MPa ASTM D 790
Izod choc avec entaille, 1/8 in 40 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 0.45 MPa 80 °C ISO 75-1/-2
Température de ramolliss. Vicat, A 150 °C ISO 306
ASTM Data
DTUL à 66 psi 95 °C ASTM D 648
Propriétés optiquesValeurUnitéNorme du test
ASTM Data
Brillant 107 - ASTM D 2457
Haze 45 % ASTM D 1003
Propriétés diversesValeurUnitéNorme du test
Masse volumique 900 kg/m³ ISO 1183
Densité 900 kg/m³ ASTM D 792
Caractéristiques
Transformation
Extrusion de profilés, Extrusion de plaques, Soufflage, Thermoformage
Propriétés spéciales
Opaque
Caractéristiques
Homopolymère
Applications
Emballage
Disponibilité régionale
Asia Pacific, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.