Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Xtel® XE5030BL - PPS-GF - Chevron Phillips Chemical Co. LP

Material Data Center offers the following functions for Xtel® XE5030BL:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Xtel datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Molding shrinkage, parallel 0.2 % ISO 294-4, 2577
Molding shrinkage, normal 0.5 % ISO 294-4, 2577
Thermal conductivity of melt 0.26 W/(m K) -
ASTM Data
Mold Shrinkage, MD 0.002 mm/mm ASTM D 955
Mold Shrinkage, TD 0.005 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Strength 135 MPa ISO 527
Flexural modulus, 23°C 9000 MPa ISO 178
Izod impact strength, +23°C 45 kJ/m² ISO 180/1U
Izod notched impact strength, +23°C 10 kJ/m² ISO 180/1A
ASTM Data
Tensile Strength 124 MPa ASTM D 638
Compressive Strength 207 MPa ASTM D 695
Flexural Modulus 8963 MPa ASTM D 790
Flexural Strength 193 MPa ASTM D 790
Izod Impact notched, 1/8 in 101 J/m ASTM D 256
Izod Impact unnotched, 1/8 in 747 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 250 °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 20 E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 60 E-6/K ISO 11359-1/-2
Burning behav. at 1.5 mm nom. thickn. V-0 class IEC 60695-11-10
Thickness tested 1.5 mm -
ASTM Data
UL 94 Flame rating V-0 - UL 94
Thickness tested 1.52 mm -
DTUL @ 264 psi 252 °C ASTM D 648
Electrical propertiesValueUnitTest Standard
ISO Data
Comparative tracking index 100 - IEC 60112
ASTM Data
Dielectric Strength, Short Time 19.7 kV/mm ASTM D 149
Dissipation Factor, 1 MHz 0.009 - ASTM D 150
Dielectric Constant, 1 MHz 3.6 - ASTM D 150
Volume Resistivity 1E15 Ohm*cm ASTM D 257
Arc Resistance 120 s ASTM D 495
Other propertiesValueUnitTest Standard
Density 1510 kg/m³ ISO 1183
Water Absorption, 24hr 0.05 % ASTM D 570
Density 1510 kg/m³ ASTM D 792
Characteristics
Delivery form
Pellets, Black
Special Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Features
Low Odor
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.