Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTOSINT® 2157 natural color - PA12 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTOSINT® 2157 natural color:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Vestosint datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
VESTOSINT 2157 natural color is a polyamide 12 fine powder for the use in liquid coating systems. It is used as an additive, for instance, in coil coating systems to improve abrasion resistance and T-bend test. It also can be used in minicoating of small iron parts, e.g. foundation corsetry or ferrite rings.
Mechanical propertiesValueUnitTest Standard
ISO Data
Yield stress 43 MPa ISO 527
Yield strain 6 % ISO 527
Strain at break 100 % ISO 527
Shore D hardness 75 - ISO 7619-1
Ball indentation hardness 90 MPa ISO 2039-1
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 184 °C ISO 11357-1/-3
Coeff. of linear therm. expansion, parallel 109 E-6/K ISO 11359-1/-2
Electrical propertiesValueUnitTest Standard
ISO Data
Volume resistivity 1E12 Ohm*m IEC 62631-3-1
Electric strength 90 kV/mm IEC 60243-1
Other propertiesValueUnitTest Standard
Humidity absorption 0.5 % Sim. to ISO 62
Density 1020 kg/m³ ISO 1183
Bulk density 350 kg/m³ -
Characteristics
Processing
Coating
Delivery form
Powder, Natural Color
Certifications
Food contact
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.