Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAPE® PA12-CF45 20641 - PA12-CF45 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAPE® PA12-CF45 20641:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Vestape datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Thermal properties - Other properties - Test specimen production
Any use of this information falls under the rules of our disclaimer.
Product Texts
HT carbon fiber reinforced UD-tape made from polyamide 12 

VESTAPE® PA12-CF45 is an unidirectional carbon fiber reinforced tape made from PA12 with a fiber volume content of 45 %, that shows a high chemical resistance, low water absorption and steady mechanical properties over a wide temperature range.

VESTAPE® PA12-CF45  is supplied as a band-shaped semi-finished product showing a width of 160 mm and a thickness of 0,25 mm.


Further information about the properties and the processing of VESTAPE® can be found in our brochure „VESTAPE“.
 


FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM OR VISIT OUR PRODUCTS AT COMPOSITES.EVONIK.COM.
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 178 °C ISO 11357-1/-3
Glass transition temperature, 10°C/min 40 °C ISO 11357-1/-2
Other propertiesValueUnitTest Standard
Humidity absorption 0.47 % Sim. to ISO 62
Density 1360 kg/m³ ISO 1183
Test specimen productionValueUnitTest Standard
ISO Data
Molding temperature, of test plate 220 °C -
Molding time, of test plate 5 min -
Cooling rate, of test plate 20 K/min -
Demolding temperature, of test plate 40 °C -
Molding pressure, of test plate 1 MPa -
Characteristics
Processing
Thermoforming
Delivery form
Tape
Special Characteristics
Increased electrical conductivity, Heat stabilized or stable to heat
Chemical Resistance
General Chemical Resistance
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.