Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® DX9321 BK E70164 - PA612-I-GF20 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® DX9321 BK E70164:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Product Texts

Molding compound based on nylon 612 specially suitable for plastic and rubber composites

VESTAMID® DX9321 BK E70164 is a heat-stabilized, glass fiber-reinforced and impact-modified PA 612 compound.

The material contains about 20 % glass fibers, an ageing protective agent and processing aid for a fast and even form filling. VESTAMID® DX9321 BK E70164 is especially suitable for the production of plastic and rubber composites.

 

Parts of VESTAMID® DX9321 BK E70164 can be directly bonded to rubber,e.g., XNBR, HNBR, AEM or FPM, without using any adhesives or adhesion promoters ("direct-bonding to rubber").

 

Because of its semi-crystallinemorphology VESTAMID® DX9321 BK E70164 provides an excellent chemical resistance. e.g., against greases, oils, fuels and hydraulic fluids.

Pigmentation may affect values

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM OR VISIT OUR PRODUCT AT  WWW.VESTAMID.COM

Processing/Physical Characteristicsdry / condUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 7 / * cm³/10min ISO 1133
Temperature 230 / * °C -
Load 5 / * kg -
Molding shrinkage, parallel 0.7 / * % ISO 294-4, 2577
Molding shrinkage, normal 0.9 / * % ISO 294-4, 2577
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Tensile Modulus 5700 / 4700 MPa ISO 527
Yield stress * / 90 MPa ISO 527
Yield strain * / 5 % ISO 527
Nominal strain at break * / 10 % ISO 527
Stress at break 115 / * MPa ISO 527
Strain at break 4.6 / * % ISO 527
Charpy impact strength, +23°C 93 / 93 kJ/m² ISO 179/1eU
Type of failure C / C - -
Charpy impact strength, -30°C 106 / 102 kJ/m² ISO 179/1eU
Type of failure C / C - -
Charpy notched impact strength, +23°C 18 / 19 kJ/m² ISO 179/1eA
Type of failure C / C - -
Charpy notched impact strength, -30°C 11 / 11 kJ/m² ISO 179/1eA
Type of failure C / C - -
Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature, 10°C/min 215 / * °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 189 / * °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 208 / * °C ISO 75-1/-2
Vicat softening temperature, B 207 / * °C ISO 306
Burning Behav. at 1.5 mm nom. thickn. HB / * class IEC 60695-11-10
Thickness tested 1.6 / * mm -
Electrical propertiesdry / condUnitTest Standard
ISO Data
Relative permittivity, 100Hz 4.4 / - - IEC 62631-2-1
Relative permittivity, 1MHz 3.1 / - - IEC 62631-2-1
Dissipation factor, 100Hz 500 / - E-4 IEC 62631-2-1
Dissipation factor, 1MHz 470 / - E-4 IEC 62631-2-1
Volume resistivity 1E12 / - Ohm*m IEC 62631-3-1
Comparative tracking index 600 / - - IEC 60112
Other propertiesdry / condUnitTest Standard
Water absorption 2 / * % Sim. to ISO 62
Humidity absorption 0.8 / * % Sim. to ISO 62
Density 1190 / 1190 kg/m³ ISO 1183
Characteristics
Processing
Injection Molding
Delivery form
Pellets, Black
Additives
Release agent
Special Characteristics
High impact or impact modified, Light stabilized or stable to light, Heat stabilized or stable to heat
Features
Good Adhesion
Chemical Resistance
General Chemical Resistance, Grease Resistance, Oil Resistance
Regional Availability
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.