Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultradur® LUX B 4520 - PBT - BASF

Material Data Center offers the following functions for Ultradur® LUX B 4520:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultradur datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 8 cm³/10min ISO 1133
Temperature 250 °C -
Load 2.16 kg -
Molding shrinkage, parallel 2.3 % ISO 294-4, 2577
Molding shrinkage, normal 2.2 % ISO 294-4, 2577
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 2700 MPa ISO 527
Yield stress 60 MPa ISO 527
Yield strain 5.2 % ISO 527
Nominal strain at break 13 % ISO 527
Flexural modulus, 23°C 2700 MPa ISO 178
Charpy impact strength, +23°C 206 kJ/m² ISO 179/1eU
Charpy impact strength, -30°C 55.1 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 3.2 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 2.1 kJ/m² ISO 179/1eA
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 223 °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 62 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 150 °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 120 E-6/K ISO 11359-1/-2
Burning behav. at 1.5 mm nom. thickn. HB class IEC 60695-11-10
Thickness tested 1.6 mm -
Burning behav. at thickness h HB class IEC 60695-11-10
Thickness tested 0.8 mm -
Other propertiesValueUnitTest Standard
Density 1320 kg/m³ ISO 1183
Bulk density 750 kg/m³ -
Material specific propertiesValueUnitTest Standard
ISO Data
Viscosity number 100 cm³/g ISO 307, 1157, 1628
Processing Recommendation Injection MoldingValueUnitTest Standard
Melt temperature 250 - 275 °C -
Mold temperature 40 - 70 °C -
Characteristics
Processing
Injection Molding
Delivery form
Pellets
Features
Laser Weldable, Low Odor
Applications
Automotive
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.