Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Filament AMHU1010F - PEI - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Filament AMHU1010F:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
3D Data
Any use of this information falls under the rules of our disclaimer.
Product Texts
ULTEM™ AMHU1010F filament is a polyetherimide product for 3D printing applications manufactured from ULTEM™ HU1010 resin. The filament is biocompatible (ISO 10993 or USP Class VI) and printed parts can be gamma, EtO or steam sterilized. This filament can be used for food and drug packaging and medical device manufacturing, from conceptual modeling to functional prototyping and end-use parts. Filament spools can be linked to resin raw material batch to help ensure material compliance and traceability.
3D DataValueUnitTest Standard
Other Standards[S]
Tensile modulus, flat 2750 MPa ASTM D 638
Tensile modulus, on-edge 2870 MPa ASTM D 638
Tensile modulus, upright 2840 MPa ASTM D 638
Stress at break, flat 73 MPa ASTM D 638
Stress at break, on-edge 80 MPa ASTM D 638
Stress at break, upright 34 MPa ASTM D 638
Strain at break, flat 4 % ASTM D 638
Strain at break, on-edge 3.8 % ASTM D 638
Strain at break, upright 1.3 % ASTM D 638
Flexural modulus, flat 2520 MPa ASTM D 790
Flexural modulus, on-edge 2840 MPa ASTM D 790
Flexural modulus, upright 2380 MPa ASTM D 790
Temp. of deflection under load, 1.80 MPa, flat 211 °C ASTM D 6484
Temp. of deflection under load, 1.80 MPa, on-edge 210 °C ASTM D 6484
Temp. of deflection under load, 1.80 MPa, upright 208 °C ASTM D 6484
Vicat softening temperature, B, flat 220 °C ASTM D 1525
Vicat softening temperature, B, on-edge 220 °C ASTM D 1525
Vicat softening temperature, B, upright 220 °C ASTM D 1525
Coeff. of linear therm. expansion, parallel, flat 51 E-6/K ASTM E 831
Coeff. of linear therm. expansion, parallel, on-edge 53 E-6/K ASTM E 831
Coeff. of linear therm. expansion, parallel, upright 53 E-6/K ASTM E 831
Coeff. of linear therm. expansion, normal, flat 53 E-6/K ASTM E 831
Coeff. of linear therm. expansion, normal, on-edge 52 E-6/K ASTM E 831
Coeff. of linear therm. expansion, normal, upright 53 E-6/K ASTM E 831
Burning Behav. at thickness h, flat V-0 class UL 94
Burning Behav. at thickness h, on-edge V-0 class UL 94
Burning Behav. at thickness h, upright V-0 class UL 94
Thickness tested 1.5 mm UL 94
Volume resistivity, flat 6.24E12 Ohm*m ASTM D 257
Volume resistivity, on-edge 1.26E13 Ohm*m ASTM D 257
S: These properties are reported by the producer according standards that are different to our defaults.
Characteristics
Processing
Additive Manufacturing
Delivery form
Monofilament
Special Characteristics
Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization
Certifications
Food contact, Medical Grade, US Pharmacopeia Class VI Approved
Applications
Medical, Packaging
Regional Availability
North America, Europe, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.