Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin LTX300A - Americas - PEI - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin LTX300A - Americas:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
High flow Polyetherimide blend with low toxicity, smoke and flame evolution. ECO Compliant, UL94 V0 listing in recognized colors.

UL Yellow Card Link E121562-221074
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 15 cm³/10min ISO 1133
Temperature 340 °C -
Load 5 kg -
ASTM Data
Melt Flow Index, MFI 2.4 g/10min ASTM D 1238
Temperature 295 °C -
Load 6.6 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 3200 MPa ISO 527
Yield stress 90 MPa ISO 527
Yield strain 6 % ISO 527
Stress at break 75 MPa ISO 527
Strain at break 25 % ISO 527
Flexural modulus 3200 MPa ISO 178
Charpy impact strength, +23°C N kJ/m² ISO 179/1eU
Charpy impact strength, -30°C N kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 7 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 6 kJ/m² ISO 179/1eA
Izod impact strength, +23°C, 4mm N kJ/m² ISO 180/1U
Izod impact strength, -30°C, 4mm N kJ/m² ISO 180/1U
Izod notched impact strength, +23°C, 4mm 7 kJ/m² ISO 180/1A
Izod notched impact strength, -30°C, 4mm 5 kJ/m² ISO 180/1A
Ball indentation hardness 127 MPa ISO 2039-1
ASTM Data
Tensile Modulus 3310 MPa ASTM D 638
Tensile Strength at Yield 97 MPa ASTM D 638
Tensile Strength at Break 85 MPa ASTM D 638
Elongation at Yield 7 % ASTM D 638
Elongation at Break 30 % ASTM D 638
Flexural Modulus 3240 MPa ASTM D 790
Izod Impact notched, 1/8 in 69 J/m ASTM D 256
Izod Impact unnotched, 1/8 in 2100 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Vicat softening temperature, A 210 °C ISO 306
Vicat softening temperature, B 200 °C ISO 306
Vicat softening temperature, 120°C/h 50N 200 °C ISO 306
Burning behav. at thickness h V-0 class IEC 60695-11-10
Thickness tested 0.8 mm -
Thermal Conductivity 0.26 W/(m K) DIN 52616
ASTM Data
DTUL @ 66 psi 201 °C ASTM D 648
DTUL @ 264 psi 187 °C ASTM D 648
Vicat Temperature 210 °C ASTM D 1525
Other propertiesValueUnitTest Standard
Water absorption 1.25 % Sim. to ISO 62
Humidity absorption 0.7 % Sim. to ISO 62
Density 1300 kg/m³ ISO 1183
Density 1300 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 135 °C -
Pre-drying - Time 4 - 6 h -
Processing humidity ≤0.02 % -
Melt temperature 350 - 370 °C -
Mold temperature 135 - 165 °C -
Zone 1 340 - 360 °C -
Zone 2 345 - 365 °C -
Zone 3 350 - 370 °C -
Screw speed 40 - 70 rpm -
Back pressure 0.3 - 0.7 MPa -
Characteristics
Processing
Injection Molding
Regional Availability
North America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.