Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TOYOLAC® 700-314 - ABS - Toray Industries, Inc.

Material Data Center offers the following functions for TOYOLAC® 700-314:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Toyolac datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Product Texts
This material is produced by Toray Plastics (Malaysia).
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 23 g/10min ISO 1133
Temperature 220 °C -
Load 10 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Strength 54 MPa ISO 527
Strain at break 18 % ISO 527
Flexural modulus, 23°C 2540 MPa ISO 178
Charpy notched impact strength, +23°C 17 kJ/m² ISO 179/1eA
Rockwell hardness R 115 - ISO 2039-2
ASTM Data
Tensile Strength 50 MPa ASTM D 638
Elongation at Break 35 % ASTM D 638
Flexural Modulus 2450 MPa ASTM D 790
Rockwell Hardness R 115 - ASTM D 785
Izod Impact notched, 1/8 in 196 J/m ASTM D 256
Izod Impact notched, Low-Temperature 118 J/m ASTM D 256
Temperature -30 °C -
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 82 °C ISO 75-1/-2
ASTM Data
UL 94 Flame rating HB - UL 94
Coefficient of Thermal Expansion, MD 71 E-6/K ASTM D 696
DTUL @ 264 psi 87 °C ASTM D 648
Electrical propertiesValueUnitTest Standard
ASTM Data
Dielectric Strength, Short Time 23 kV/mm ASTM D 149
Surface Resistivity >1E15 Ohm ASTM D 257
Volume Resistivity >1E15 Ohm*cm ASTM D 257
Other propertiesValueUnitTest Standard
Density 1050 kg/m³ ISO 1183
Density 1050 kg/m³ ASTM D 792
Characteristics
Regional Availability
North America, Europe, Asia Pacific, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.