Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tarnamid® T-27 GF10 MX6 - PA6-(GF+MX)40 - Grupa Azoty S.A.

Material Data Center offers the following functions for Tarnamid® T-27 GF10 MX6:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Tarnamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristicsdry / condUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 35 / * cm³/10min ISO 1133
Temperature 275 / * °C -
Load 5 / * kg -
Molding shrinkage, parallel 0.4 / * % ISO 294-4, 2577
Molding shrinkage, normal 0.8 / * % ISO 294-4, 2577
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Tensile Modulus 7000 / - MPa ISO 527
Tensile Strength 95 / - MPa ISO 527
Strain at break 3 / - % ISO 527
Flexural modulus, 23°C 6000 / - MPa ISO 178
Charpy impact strength, +23°C 40 / - kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 3.5 / - kJ/m² ISO 179/1eA
Izod notched impact strength, +23°C 3.5 / - kJ/m² ISO 180/1A
Ball indentation hardness 220 / - MPa ISO 2039-1
Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature, 10°C/min 221 / * °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 180 / * °C ISO 75-1/-2
Vicat softening temperature, B 200 / * °C ISO 306
Burning behav. at thickness h V-2 / * class IEC 60695-11-10
Thickness tested 3.2 / * mm -
Electrical propertiesdry / condUnitTest Standard
ISO Data
Relative permittivity, 1MHz 4.2 / - - IEC 62631-2-1
Dissipation factor, 1MHz 272 / - E-4 IEC 62631-2-1
Volume resistivity 1E9 / - Ohm*m IEC 62631-3-1
Surface resistivity * / 1E11 Ohm IEC 62631-3-2
Electric strength 28 / - kV/mm IEC 60243-1
Comparative tracking index 600 / - - IEC 60112
Other propertiesdry / condUnitTest Standard
Density 1420 / - kg/m³ ISO 1183
Characteristics
Processing
Injection Molding
Delivery form
Granules, Black, Natural Color
Additives
Release agent
Special Characteristics
Flame retardant, Heat stabilized or stable to heat
Applications
Automotive, Building Construction, Electrical and Electronical
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.