Complete Set of CAMPUSĀ® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Senosan - ABS, ASA, PMMA, PS - Senoplast Klepsch & Co. GmbH

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

A search for "Senosan" in Material Data Center leads to the following information:

Tradename: Senosan
Family: ABS, ASA, PMMA, PS
Producer: Senoplast Klepsch & Co. GmbH
4 hits in the literature database


Material Data Center offers information about the following products with the requested tradename. To view a datasheet, please click on the relevant product.

Kunststoffe international, 2005-11-21, Semi-finished Composites: Hygienic Sanitary Surfaces
... baths (prEN 14516) and shower trays (prEN 14527) now provide the manufacturers with a tool that allows them to make an objective evaluation of the quality of sanitary articles of different materials. A newly developed ABS/PMMA coextrudate (grade: Senosan3000, manufacturer: Senoplast Klepsch & Co., Piesendorf/Austria) has been designed specifically to comply with the stringent demands made on water-carrying sanitary articles (Fig.1). Lower Costs for the Manufacturer A major advantage for compa...

Kunststoffe international, 2005-11-21, Thermoplastic Films: Car Body Parts With and Without a Paint System
...ize and assembled without any additional reinforcement. In some cases, the thermoformed parts are painted. With the Renault Traffic, for example, the side panel under the loading area is made of coextruded, thermoformed ABS/PMMA sheets (Senosan AM50 Solar New EG sheets) in white, with the colour shade matched to the painted cab (Fig. 5). Increasing use is being made of directly coextruded sheets of ABS/PMMA composite (type: Senosan AM50 Solar Neu EG) or ABS/PC/PMMA composite (type: Senosan VP CM...

Kunststoffe international, 2018-03-09, Scratch-Resistant and Mirror Bright
...ils to satisfy various tests for resistance to sun cream. For this reason, Senco (Europe) developed a thermoformable hard lacquer (hard coat).The combination of extrusion and coating process is already being used at an affiliate within the group. Senosan GmbH produces furniture films that are given a hard coating directly on the extrusion line. Since furniture films are only laminated flat on medium density fiberboard (MDF) and not thermoformed, the lacquer is cured by UV light following applica...

Kunststoffe international, 2019-09-17, In the Fast Lane with Plastics
...6 years is way above 20,000 vehicles per year. In the case of steel sheet construction, the break-even point is certainly way above 40,000 vehicles per year. In the thermoforming process, co-extruded plastic sheets (brand name Senosan) made from acrylonitrile-butadiene-styrene (ABS) and polymethyl methacrylate layers (PMMA) are used. They are UV-resistant, offer a class A surface, and are repair- and recycling-friendly. Plastic sheets can be relatively easily thermoformed. A two-shell constructi...


Additional information about this tradename, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.

Note: the information in Material Data Center was collected with maximum care, based on information from material producers. They are subject to short term changes at the market. There is no warranty for the correctness of this information. In no way this information can be seen as a legal advice, whether certain tradenames are protected or not.