Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Sarlink® EE-2260B - TPS - Teknor Apex Co.

Material Data Center offers the following functions for Sarlink® EE-2260B:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Sarlink datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts

Preliminary Data


The Sarlink EE-2200 Series is a general purpose thermoplastic elastomer series, available in BLK, designed for automotive exterior extrusion applications. Sarlink EE-2260B is a medium hardness, high density, UV stabilized grade with very good extrudability.



PropertyValueUnitStandard
Tensile properties (Cross Flow Direction)

ISO 37
   Tensile strength at break   5,4 MPa
   Modulus at 100% elongation   1,6 MPa
   Elongation at break  790 %
Apparent shear viscosity @ 206 1/s, 200°C   266 Pa.s ASTM D3835 
Mechanical propertiesValueUnitTest Standard
ISO Data
Compression set at 23 °C, 24h 20 % ISO 815
Compression set at 70 °C, 24h 31 % ISO 815
Shore A hardness 63 - ISO 7619-1
Other Standards[S]
Stress at 100% elongation 2.2 MPa ISO 37
Stress at break TPE 5.4 MPa ISO 37
Strain at break TPE 650 % ISO 37
S: These properties are reported by the producer according standards that are different to our defaults.
Other propertiesValueUnitTest Standard
Density 1180 kg/m³ ISO 1183
Characteristics
Processing
Other Extrusion
Special Characteristics
U.V. stabilized or stable to weather
Features
Good Adhesion
Chemical Resistance
Ozone Resistance
Applications
Automotive
Regional Availability
North America, Europe, Asia Pacific, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.