Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® SABITAL™ 90GV10 - POM - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® SABITAL™ 90GV10:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
SABITAL™ 90GV10 is POM copolymer compounded with glass fibers for injection molding applications, it is reinforced with ca. 10% glass fibers for application requiring high stiffness, strength and thermal property.
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 4000 MPa ISO 527
Strain at break 3.5 % ISO 527
Flexural modulus, 23°C 4000 MPa ISO 178
Charpy impact strength, +23°C 6 kJ/m² ISO 179/1eU
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 166 °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 154 °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 60 E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 120 E-6/K ISO 11359-1/-2
Other propertiesValueUnitTest Standard
Density 1480 kg/m³ ISO 1183
Characteristics
Processing
Injection Molding
Features
Copolymer
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.