Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of SABIC® PP 527K - PP - Saudi Basic Industries Corporation (SABIC)
Material Data Center offers the following functions for SABIC® PP 527K:
unit conversion, PDF datasheet print, comparison with other plastics, application examples, snap fit calculation, beam deflection calculation, CAE Interfaces
Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center
Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our
disclaimer.
Product Texts
SABIC® PP 527K is a leading grade typically used for products in thermoforming. Tailoring of the polymer architecture combined with effective nucleation resulted in a good balance of very high stiffness combined with excellent transparency. Its high crystallisation temperature is ideally suited for further line speed improvements. Moreover it is formulated with a combined processing and antistatic additive package.
Application:
SABIC® PP 527K is typically used in packaging for Fruit, Vegetables, Meat, Fish, Poultry and Ambient Food packaging.
Health, Safety and Food Contact regulations:
Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site
http://www.sabic.com.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
IMDS 7172624
| Mechanical properties | Value | Unit | Test Standard |
| ISO Data |
| Tensile Modulus |
2200 |
MPa |
ISO 527 |
| Yield stress |
40 |
MPa |
ISO 527 |
| Yield strain |
6 |
% |
ISO 527 |
| Charpy notched impact strength, +23°C |
4.5 |
kJ/m² |
ISO 179/1eA |
| Thermal properties | Value | Unit | Test Standard |
| ISO Data |
| Temp. of deflection under load, 1.80 MPa |
65 |
°C |
ISO 75-1/-2 |
| Temp. of deflection under load, 0.45 MPa |
115 |
°C |
ISO 75-1/-2 |
| Vicat softening temperature, A |
155 |
°C |
ISO 306 |
| Vicat softening temperature, B |
100 |
°C |
ISO 306 |
Characteristics
Processing
Thermoforming
Certifications
Food contact
| Application examples | |
| Lightweight packaging, food |
|
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
