Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® LLDPE 6118LE - (PE-LLD) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® LLDPE 6118LE:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Thermal properties - Optical properties - Film Properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
SABIC® LLDPE 6118LE is a hexene linear low density polyethylene resin. Films made from this resin exhibitgood tensile strength, stiffness, dart drop impact strength, tear strength and hottack properties. This resincontains anti block and slip agent. Application Typical application for SABIC® LLDPE 6118LE are heavy duty bags, lamination films, agriculture films, stretchwrap films, frozen food packaging and other applications requiring high impact strength, high tear resistance and improved sealing properties. Film properties Film of 50 ?m and BUR = 2 has been produced on Kiefel IBC with 140 kg/h. Die size 200 mm, die gap 2.7 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.
Thermal propertiesValueUnitTest Standard
ISO Data
Vicat softening temperature, A 106 °C ISO 306
Optical propertiesValueUnitTest Standard
ASTM Data
Haze 13 % ASTM D 1003
Film PropertiesValueUnitTest Standard
ISO Data
Tensile Modulus, parallel 190 MPa ISO 527-3
Tensile Modulus, normal 230 MPa ISO 527-3
Stress at yield, parallel 11 MPa ISO 527-3
Stress at yield, normal 12.5 MPa ISO 527-3
Stress at break, parallel 47 MPa ISO 527-3
Stress at break, normal 40 MPa ISO 527-3
Trouser Tear resistance, parallel 100 N/mm ISO 6383-1
Trouser Tear resistance, normal 400 N/mm ISO 6383-1
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.