Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® HDPE CC860V - (PE-HD) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® HDPE CC860V:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Thermal properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
SABIC® HDPE CC860V is typically used for the injection molding of high demanding applications, such as caps & closures for still water applications. The material offers a good combination of stiffness and impact resistance. This product is not intended for and must not be used in any pharmaceutical/medical applications.
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 1300 MPa ISO 527
Yield stress 30 MPa ISO 527
Stress at break 15 MPa ISO 527
Strain at break >50 % ISO 527
Flexural modulus, 23°C 1500 MPa ISO 178
Flexural strength 30 MPa ISO 178
Shore D hardness 64 - ISO 7619-1
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 133 °C ISO 11357-1/-3
Temp. of deflection under load, 0.45 MPa 90 °C ISO 75-1/-2
Vicat softening temperature, A 127 °C ISO 306
Characteristics
Processing
Injection Molding
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.