Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin NH6020 - Europe - (PPE+PS) - Saudi Basic Industries Corporation (SABIC)

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding - Diagrams

Any use of this information falls under the rules of our disclaimer.

Product Texts

NORYL™ NH6020 resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS) designed for high heat resistance and thin-wall FR performance. This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2.5mm and V0 at 0.75mm along with UL746C Outdoor Suitability rating of F1 and RTI of 110C. NORYL NH6020 resin passes VDE/DIN 475 part 815 testing, Ball Pressure Test (BPT) at 125C, GWFI 960C at 1, 2, 3mm, GWIT 825C at 1mm, and CTI >600V making this an excellent candidate for unattended appliance components where EN/IEC 60335 applies.

UL Yellow Card Link E45329-100158888

Processing/Physical Characteristics	Value	Unit	Test Standard
ISO Data
Melt volume-flow rate, MVR	11	cm³/10min	ISO 1133
Temperature	280	°C	-
Load	5	kg	-
Density of melt	1050	kg/m³	-
Thermal conductivity of melt	0.18	W/(m K)	-
Spec. heat capacity of melt	2010	J/(kg K)	-
Ejection temperature	138	°C	-
ASTM Data
Melt Flow Index, MFI	13.5	g/10min	ASTM D 1238
Temperature	280	°C	-
Load	5	kg	-

Mechanical properties	Value	Unit	Test Standard
ISO Data
Tensile Modulus	2740	MPa	ISO 527
Yield stress	77	MPa	ISO 527
Yield strain	4.6	%	ISO 527
Stress at break	56	MPa	ISO 527
Strain at break	4.2	%	ISO 527
Flexural modulus	2680	MPa	ISO 178
Charpy notched impact strength, +23°C	9	kJ/m²	ISO 179/1eA
Izod notched impact strength, +23°C, 4mm	8	kJ/m²	ISO 180/1A
Izod notched impact strength, -30°C, 4mm	5	kJ/m²	ISO 180/1A
ASTM Data
Tensile Modulus	2740	MPa	ASTM D 638
Tensile Strength at Yield	78	MPa	ASTM D 638
Tensile Strength at Break	67	MPa	ASTM D 638
Elongation at Yield	4.6	%	ASTM D 638
Elongation at Break	6.1	%	ASTM D 638
Flexural Modulus	3020	MPa	ASTM D 790
Izod Impact notched, 1/8 in	49	J/m	ASTM D 256
Izod Impact notched, Low-Temperature	36	J/m	ASTM D 256
Temperature	-30	°C	-

Thermal properties	Value	Unit	Test Standard
ISO Data
Temp. of deflection under load, 1.80 MPa	124	°C	ISO 75-1/-2
Vicat softening temperature, B	141	°C	ISO 306
Vicat softening temperature, 120°C/h 50N	151	°C	ISO 306
Burning behav. at thickness h	V-0	class	IEC 60695-11-10
Thickness tested	0.8	mm	-
Burning behav. 5V at thickness h	5VA	class	IEC 60695-11-20
Thickness tested	2.5	mm	-
Glow Wire Flammability Index (GWFI)	960	°C	IEC 60695-2-12
Glow Wire Flammability Index (GWFI)	960	°C	IEC 60695-2-12
Glow Wire Flammability Index (GWFI)	960	°C	IEC 60695-2-12
Glow Wire Ignition Temperature (GWIT)	825	°C	IEC 60695-2-13
GWIT - thickness tested (1)	1	mm	-
Glow Wire Ignition Temperature (GWIT)	800	°C	IEC 60695-2-13
GWIT - thickness tested (2)	2	mm	-
Glow Wire Ignition Temperature (GWIT)	800	°C	IEC 60695-2-13
GWIT - thickness tested (3)	3	mm	-
ASTM Data
DTUL @ 264 psi	125	°C	ASTM D 648
Vicat Temperature	150	°C	ASTM D 1525

Electrical properties	Value	Unit	Test Standard
ISO Data
Dissipation factor, 1MHz	29	E-4	IEC 62631-2-1
Volume resistivity	>1E13	Ohm*m	IEC 62631-3-1
Comparative tracking index	600	-	IEC 60112

Other properties	Value	Unit	Test Standard
Water absorption	0.18	%	Sim. to ISO 62
Humidity absorption	0.06	%	Sim. to ISO 62
Density	1140	kg/m³	ISO 1183
Density	1140	kg/m³	ASTM D 792

Processing Recommendation Injection Molding	Value	Unit	Test Standard
Pre-drying - Temperature	110 - 120	°C	-
Pre-drying - Time	2 - 3	h	-
Melt temperature	300 - 320	°C	-
Mold temperature	100 - 130	°C	-
Feed temperature	80 - 100	°C	-
Zone 1	260 - 280	°C	-
Zone 2	280 - 300	°C	-
Zone 3	300 - 320	°C	-

Diagrams

Characteristics

Processing

Injection Molding

Additives

Flame retarding agent

Special Characteristics

Flame retardant

Regional Availability

Europe

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.