Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsamid® AESNO P201 TL - PA12 - ARKEMA

Check here, which other Rilsamid datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Diagrams

Any use of this information falls under the rules of our disclaimer.

Product Texts

Rilsamid® AESNO P201 TL resin is a natural polyamide 12. This grade is plasticized and designed for tube extrusion.

Rilsamid® AESNO P201 TL resin falls into the PA12-PHLY category according to DIN 73378.

Processing/Physical Characteristics	dry / cond	Unit	Test Standard
ISO Data
Melt volume-flow rate, MVR	5 / *	cm³/10min	ISO 1133
Temperature	235 / *	°C	-
Load	5 / *	kg	-

Mechanical properties	dry / cond	Unit	Test Standard
ISO Data
Tensile Modulus	- / 540	MPa	ISO 527
Yield stress	- / 27	MPa	ISO 527
Yield strain	- / 28	%	ISO 527
Nominal strain at break	- / >50	%	ISO 527
Charpy notched impact strength, -30°C	- / 8	kJ/m²	ISO 179/1eA
Shore D hardness	62 / *	-	ISO 7619-1

Thermal properties	dry / cond	Unit	Test Standard
ISO Data
Melting temperature, 10°C/min	176 / *	°C	ISO 11357-1/-3

Other properties	dry / cond	Unit	Test Standard
Density	1010 / -	kg/m³	ISO 1183

Diagrams

Characteristics

Processing

Profile Extrusion, Other Extrusion

Delivery form

Pellets

Additives

Plasticizer

Special Characteristics

High impact or impact modified, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat

Regional Availability

North America, Europe, Asia Pacific, South and Central America, Near East/Africa

Other text information

Other extrusion

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 230°C / 250°C / 270°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 80°C.

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.