Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsamid® AESNO P10 TL - PA12 - ARKEMA

Material Data Center offers the following functions for Rilsamid® AESNO P10 TL:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Rilsamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
ISO 16396 - PA12-P, EGHL, C22-007

Rilsamid® AESNO P10 TL resin is a natural polyamide 12. This grade is plasticized and designed for tube extrusion.
Processing/Physical Characteristicsdry / condUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 8 / * cm³/10min ISO 1133
Temperature 235 / * °C -
Load 2.16 / * kg -
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Tensile Modulus - / 710 MPa ISO 527
Yield stress - / 31 MPa ISO 527
Yield strain - / 20 % ISO 527
Nominal strain at break - / >50 % ISO 527
Charpy notched impact strength, +23°C - / 9 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C - / 1 kJ/m² ISO 179/1eA
Shore D hardness 69 / * - ISO 7619-1
Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature, 10°C/min 180 / * °C ISO 11357-1/-3
Other propertiesdry / condUnitTest Standard
Density 1030 / - kg/m³ ISO 1183
Characteristics
Processing
Profile Extrusion, Other Extrusion
Delivery form
Pellets
Additives
Plasticizer
Special Characteristics
Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.