Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Premi-Glas® 1200H-10 - UP-GF - LyondellBasell Industries

Material Data Center offers the following functions for Premi-Glas® 1200H-10:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Premi-Glas datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Modulus 11000 MPa ASTM D 638
Tensile Strength 20.7 MPa ASTM D 638
Compressive Strength 121 MPa ASTM D 695
Flexural Modulus 9653 MPa ASTM D 790
Flexural Strength 68.9 MPa ASTM D 790
Izod Impact notched, 1/8 in 310 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ASTM Data
UL 94 Flame rating HB - UL 94
Thickness tested 1.52 mm -
Electrical propertiesValueUnitTest Standard
ASTM Data
Dielectric Strength, Short Time 15 kV/mm ASTM D 149
Arc Resistance 180 s ASTM D 495
Characteristics
Processing
Compression Molding
Delivery form
Sheet Molding Compound
Special Characteristics
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Features
Thermal Stability
Applications
General Purpose
Regional Availability
North America, Europe, Asia Pacific, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.