Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Plenco 07591 - PF-(MX+Z) - Plastics Engineering Co.

Material Data Center offers the following functions for Plenco 07591:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Plenco datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
PLENCO 07591 is a mineral and flock cotton filled novolac phenolic molding compound.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Mold Shrinkage, MD 0.0072 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Modulus 8424 MPa ASTM D 638
Tensile Strength 56 MPa ASTM D 638
Compressive Strength 195 MPa ASTM D 695
Flexural Modulus 7557 MPa ASTM D 790
Flexural Strength 80.9 MPa ASTM D 790
Rockwell Hardness E 82 - ASTM D 785
Izod Impact notched, 1/8 in 25.8 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ASTM Data
UL 94 Flame rating V-0 - UL 94
Thickness tested 4.3 mm -
DTUL @ 264 psi 177 °C ASTM D 648
Limiting Oxygen Index 32.7 % ASTM D 2863
Electrical propertiesValueUnitTest Standard
ASTM Data
Dielectric Strength, Short Time 10.2 kV/mm ASTM D 149
Dissipation Factor, 1 MHz 0.064 - ASTM D 150
Dielectric Constant, 1 MHz 5.3 - ASTM D 150
Volume Resistivity 1.4E11 Ohm*cm ASTM D 257
Arc Resistance 152 s ASTM D 495
Other propertiesValueUnitTest Standard
Density 1450 kg/m³ ASTM D 792
Characteristics
Processing
Injection Molding
Delivery form
Black
Certifications
Contains renewable resources
Regional Availability
North America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.