Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX674PC - Europe - (PPE+PA*) - Saudi Basic Industries Corporation (SABIC)

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding - Diagrams

Any use of this information falls under the rules of our disclaimer.

Product Texts

NORYL GTX™ 674PC resin is a conductive, non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade is optimized to allow for in- or on-line primer-less powder coat painting around corners and holes with a Class A Surface. NORYL GTX674PC resin exhibits high heat resistance, improved surface appearance and is an excellent candidate for automotive applications such as mirror housings and brackets. This material is only available in black.

Processing/Physical Characteristics	Value	Unit	Test Standard
ISO Data
Density of melt	967	kg/m³	-
Thermal conductivity of melt	0.19	W/(m K)	-
Spec. heat capacity of melt	3760	J/(kg K)	-
Ejection temperature	156	°C	-
ASTM Data
Melt Flow Index, MFI	25	g/10min	ASTM D 1238
Temperature	300	°C	-
Load	5	kg	-

Mechanical properties	Value	Unit	Test Standard
ISO Data
Tensile Modulus	2320	MPa	ISO 527
Yield strain	3	%	ISO 527
Stress at break	60	MPa	ISO 527
Strain at break	4	%	ISO 527
Flexural modulus	2480	MPa	ISO 178
ASTM Data
Tensile Modulus	2810	MPa	ASTM D 638
Tensile Strength at Yield	65	MPa	ASTM D 638
Tensile Strength at Break	64	MPa	ASTM D 638
Elongation at Yield	3	%	ASTM D 638
Elongation at Break	4	%	ASTM D 638
Flexural Modulus	2890	MPa	ASTM D 790
Izod Impact notched, 1/8 in	74	J/m	ASTM D 256
Izod Impact notched, Low-Temperature	50	J/m	ASTM D 256
Temperature	-30	°C	-

Thermal properties	Value	Unit	Test Standard
ISO Data
Temp. of deflection under load, 0.45 MPa	185	°C	ISO 75-1/-2
Vicat softening temperature, B	197	°C	ISO 306
Vicat softening temperature, 120°C/h 50N	196	°C	ISO 306
Coeff. of linear therm. expansion, parallel	122	E-6/K	ISO 11359-1/-2
Coeff. of linear therm. expansion, normal	134	E-6/K	ISO 11359-1/-2
ASTM Data
DTUL @ 66 psi	188	°C	ASTM D 648
Vicat Temperature	197	°C	ASTM D 1525

Other properties	Value	Unit	Test Standard
Density	1110	kg/m³	ISO 1183
Density	1110	kg/m³	ASTM D 792

Processing Recommendation Injection Molding	Value	Unit	Test Standard
Pre-drying - Temperature	95 - 105	°C	-
Pre-drying - Time	3 - 4	h	-
Processing humidity	≤0.07	%	-
Melt temperature	280 - 305	°C	-
Mold temperature	75 - 120	°C	-
Zone 1	265 - 305	°C	-
Zone 2	270 - 305	°C	-
Zone 3	275 - 305	°C	-
Screw speed	20 - 100	rpm	-
Back pressure	0.3 - 1.4	MPa	-

Diagrams

Characteristics

Processing

Injection Molding

Regional Availability

Europe

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.