Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin NP6100 - Americas - (PPE+PS) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin NP6100 - Americas:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
NORYL™ NP6100 resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS) designed for high heat resistance with good strength, toughness and robust FR performance. This extrudable grade contains non-brominated, non-chlorinated flame retardant. NORYL NP6100 resin may be an excellent candidate for mining pipe applications as well as low smoke cable channel applications where EN45545 R22 certificate ( European railway standard for small electrical parts) is required.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 11 cm³/10min ISO 1133
Temperature 280 °C -
Load 10 kg -
ASTM Data
Melt Flow Index, MFI 10.5 g/10min ASTM D 1238
Temperature 280 °C -
Load 10 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 2330 MPa ISO 527
Yield stress 68 MPa ISO 527
Yield strain 4.5 % ISO 527
Stress at break 52 MPa ISO 527
Strain at break 7 % ISO 527
Flexural modulus 2350 MPa ISO 178
Charpy impact strength, +23°C N kJ/m² ISO 179/1eU
Charpy impact strength, -30°C N kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 37 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 21 kJ/m² ISO 179/1eA
Izod impact strength, +23°C, 4mm N kJ/m² ISO 180/1U
Izod impact strength, -30°C, 4mm N kJ/m² ISO 180/1U
Izod notched impact strength, +23°C, 4mm 39.9 kJ/m² ISO 180/1A
Izod notched impact strength, -30°C, 4mm 15.8 kJ/m² ISO 180/1A
ASTM Data
Tensile Strength at Yield 60 MPa ASTM D 638
Tensile Strength at Break 47 MPa ASTM D 638
Elongation at Yield 4.5 % ASTM D 638
Elongation at Break 10.5 % ASTM D 638
Izod Impact notched, 1/8 in 510 J/m ASTM D 256
Izod Impact notched, Low-Temperature 180 J/m ASTM D 256
Temperature -30 °C -
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 0.45 MPa 146 °C ISO 75-1/-2
Vicat softening temperature, B 151 °C ISO 306
Vicat softening temperature, 120°C/h 50N 153 °C ISO 306
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
GWFI - thickness tested (3) 1 mm -
ASTM Data
DTUL @ 264 psi 121 °C ASTM D 648
Other propertiesValueUnitTest Standard
Density 1080 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 90 - 100 °C -
Pre-drying - Time 2 - 4 h -
Processing humidity ≤0.02 % -
Melt temperature 255 - 275 °C -
Zone 1 235 - 255 °C -
Zone 2 255 - 275 °C -
Zone 3 255 - 275 °C -
Characteristics
Additives
Flame retarding agent
Special Characteristics
Flame retardant
Regional Availability
North America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.