Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin NHP8000VT3 - (PPE+PS) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin NHP8000VT3:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
NORYL NHP8000VT3 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS) designed for high heat resistance, ultra-thin-wall FR and High tracking resistance performance. This extrusion and injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries CTI 600V / PLC 0 and UL94 flame rating of V0 at 0.25mm. NORYL NHP8000VT3 is based on a unique co-polymer technology and exhibits high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption and low specific gravity. This grade is targeted for electrical vehicle (EV) battery pack insulation sheet/film, bus bar insulation layer and other high voltage electric components.
UL Yellow Card E207780-104546521
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 11.7 g/10min ASTM D 1238
Temperature 300 °C -
Load 5 kg -
Mold Shrinkage, MD 0.0073 mm/mm ASTM D 955
Mold Shrinkage, TD 0.0079 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Modulus 2491 MPa ASTM D 638
Tensile Strength at Yield 66.8 MPa ASTM D 638
Elongation at Yield 4.2 % ASTM D 638
Elongation at Break 10.8 % ASTM D 638
Flexural Modulus 2600 MPa ASTM D 790
Flexural Strength 108 MPa ASTM D 790
Izod Impact notched, 1/8 in 211 J/m ASTM D 256
Izod Impact notched, Low-Temperature 84 J/m ASTM D 256
Temperature -40 °C -
Izod Impact unnotched, 1/8 in N J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Burning behav. at thickness h V-0 class IEC 60695-11-10
Thickness tested 0.2 mm -
Yellow Card available yes - -
ASTM Data
DTUL @ 66 psi 150 °C ASTM D 648
DTUL @ 264 psi 133 °C ASTM D 648
Vicat Temperature 155 °C ASTM D 1525
Electrical propertiesValueUnitTest Standard
ISO Data
Comparative tracking index 600 - IEC 60112
ASTM Data
Surface Resistivity 7.5E16 Ohm ASTM D 257
Volume Resistivity 6.2E15 Ohm*cm ASTM D 257
Other propertiesValueUnitTest Standard
Density 1100 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 100 - 120 °C -
Pre-drying - Time 3 - 5 h -
Melt temperature 280 - 330 °C -
Mold temperature 70 - 120 °C -
Zone 1 280 - 330 °C -
Zone 2 280 - 330 °C -
Zone 3 280 - 330 °C -
Nozzle temperature 250 - 330 °C -
Screw speed 20 - 100 rpm -
Back pressure 3 - 8 MPa -
Characteristics
Processing
Injection Molding, Other Extrusion, Thermoforming
Special Characteristics
Flame retardant, Halogen-free, High impact or impact modified, Heat stabilized or stable to heat
Features
Low Warpage
Chemical Resistance
Hydrolytically Stable
Applications
Automotive, Electrical and Electronical
Regional Availability
North America, Europe, Asia Pacific, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.