Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin HMC3008V - (PPE+PS)-(CF+GF) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin HMC3008V:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
NORYL HMC3008V compound is based on Polyphenylene Ether (PPE) resin containing carbon fiber, glass fiber and minerals (total 26%). Added features of this grade include: Electrically Conductive, Non-Halogenated Flame Retardant, Dimensional Stability.

UL Yellow Card Link E45587-237042
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 10.6 g/10min ASTM D 1238
Temperature 300 °C -
Load 5 kg -
Mechanical propertiesValueUnitTest Standard
ASTM Data
Izod Impact notched, 1/8 in 66.4 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Burning behav. at 1.5 mm nom. thickn. V-1 class IEC 60695-11-10
Thickness tested 1.5 mm -
Burning behav. at thickness h V-0 class IEC 60695-11-10
Thickness tested 3.0 mm -
Electrical propertiesValueUnitTest Standard
ASTM Data
Surface Resistivity 42000 Ohm ASTM D 257
Other propertiesValueUnitTest Standard
Density 1260 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 120 °C -
Pre-drying - Time 2 - 4 h -
Melt temperature 290 - 310 °C -
Mold temperature 80 - 110 °C -
Zone 1 270 - 290 °C -
Zone 2 270 - 290 °C -
Zone 3 280 - 300 °C -
Characteristics
Processing
Injection Molding
Additives
Flame retarding agent
Special Characteristics
Increased electrical conductivity, Flame retardant
Regional Availability
North America, Europe, Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.