Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin EN185 - Americas - (PPE+PS) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin EN185 - Americas:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Product Texts
NORYL™ EN185 resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This extrusion grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of v0 at 3mm and V1 at 1.5mm. NORYL EN185 resin exhibits excellent impact strength, very low moisture absorption, good dimensional stability, and great machinability. NORYL EN185 resin is an excellent candidate for a variety of applications including fiber optic ducting,

UL Yellow Card Link E121562-221153
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Strength at Yield 42 MPa ASTM D 638
Elongation at Break 50 % ASTM D 638
Rockwell Hardness R 113 - ASTM D 785
Izod Impact notched, 1/8 in 389 J/m ASTM D 256
Izod Impact notched, Low-Temperature 160 J/m ASTM D 256
Temperature -40 °C -
Thermal propertiesValueUnitTest Standard
ISO Data
Burning behav. at 1.5 mm nom. thickn. V-1 class IEC 60695-11-10
Thickness tested 1.5 mm -
Burning behav. at thickness h V-0 class IEC 60695-11-10
Thickness tested 3.0 mm -
Electrical propertiesValueUnitTest Standard
ISO Data
Dissipation factor, 1MHz 35 E-4 IEC 62631-2-1
ASTM Data
Dielectric Strength, Short Time 24.8 kV/mm ASTM D 149
Dissipation Factor, 60 Hz 0.004 - ASTM D 150
Dielectric Constant, 60 Hz 2.8 - ASTM D 150
Other propertiesValueUnitTest Standard
Density 1080 kg/m³ ASTM D 792
Characteristics
Additives
Flame retarding agent
Special Characteristics
Flame retardant
Regional Availability
North America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.