Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUVOTECH 1-9513 - (PA66+PTFE)-GF - LEHVOSS Group

Material Data Center offers the following functions for LUVOTECH 1-9513:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Luvotech datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Molding shrinkage, parallel 0.3 % ISO 294-4, 2577
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 11000 MPa ISO 527
Tensile Strength 160 MPa ISO 527
Flexural modulus, 23°C 9000 MPa ISO 178
Charpy impact strength, -30°C 40 kJ/m² ISO 179/1eU
Thermal propertiesValueUnitTest Standard
ISO Data
Vicat softening temperature, A 250 °C ISO 306
Coeff. of linear therm. expansion, parallel 25 E-6/K ISO 11359-1/-2
Electrical propertiesValueUnitTest Standard
ISO Data
Surface resistivity 1E13 Ohm IEC 62631-3-2
Other propertiesValueUnitTest Standard
Density 1520 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 75 °C -
Pre-drying - Time 6 - 16 h -
Processing humidity ≤0.1 % -
Melt temperature 290 °C -
Mold temperature 90 - 120 °C -
Zone 1 290 - 310 °C -
Zone 2 290 - 310 °C -
Zone 3 290 - 310 °C -
Nozzle temperature 280 - 300 °C -
Characteristics
Processing
Injection Molding
Additives
Lubricants
Special Characteristics
Heat stabilized or stable to heat
Features
Low Warpage, Tribologic Grade
Applications
Automotive, IT / Business Machine
Regional Availability
North America, Europe, Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.