Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUPOY PC 1302UV-08 - PC - LG Chem

Material Data Center offers the following functions for LUPOY PC 1302UV-08:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lupoy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Product Texts

0% UV light transmittance at wavelength below 400 nm.

Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 8 g/10min ASTM D 1238
Temperature 300 °C -
Load 1.2 kg -
Mold Shrinkage, MD 0.006 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Modulus 2410 MPa ASTM D 638
Tensile Strength at Yield 60 MPa ASTM D 638
Tensile Strength at Break 72 MPa ASTM D 638
Elongation at Yield 6 % ASTM D 638
Elongation at Break 150 % ASTM D 638
Flexural Modulus 2410 MPa ASTM D 790
Flexural Strength 96 MPa ASTM D 790
Rockwell Hardness M 73 - ASTM D 785
Izod Impact notched, 1/8 in 900 J/m ASTM D 256
Izod Impact unnotched, 1/8 in N J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Burning behav. at 1.5 mm nom. thickn. V-2 class IEC 60695-11-10
Thickness tested 1.6 mm -
Yellow Card available yes - -
Glow Wire Ignition Temperature (GWIT) 850 °C IEC 60695-2-13
GWIT - thickness tested (1) 2 mm -
ASTM Data
UL 94 Flame rating V-2 - UL 94
Thickness tested 0.5 mm -
Coefficient of Thermal Expansion, MD 68 E-6/K ASTM D 696
DTUL @ 66 psi 144[ann.] °C ASTM D 648
DTUL @ 264 psi 128 °C ASTM D 648
Vicat Temperature 150 °C ASTM D 1525
Limiting Oxygen Index 26 % ASTM D 2863
ann.: annealed
Electrical propertiesValueUnitTest Standard
ISO Data
Comparative tracking index 250 - IEC 60112
ASTM Data
Dielectric Strength, Short Time 17 kV/mm ASTM D 149
Dissipation Factor, 60 Hz 0.001 - ASTM D 150
Dielectric Constant, 60 Hz 3 - ASTM D 150
Volume Resistivity 2E17 Ohm*cm ASTM D 257
Optical propertiesValueUnitTest Standard
ASTM Data
Haze 1.1 % ASTM D 1003
Light Transmittance 89 % ASTM D 1003
Index of Refraction 1.59 - ASTM D 542
Other propertiesValueUnitTest Standard
Water Absorption, 24hr 0.15 % ASTM D 570
Water Absorption, Equilibrium 0.32 % ASTM D 570
Density 1200 kg/m³ ASTM D 792
Characteristics
Processing
Injection Molding, Other Extrusion
Special Characteristics
High impact or impact modified, Heat stabilized or stable to heat, Transparent
Regional Availability
North America, Europe, Asia Pacific, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.