Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUPOY EF1006FP - PC - LG Chem

Material Data Center offers the following functions for LUPOY EF1006FP:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lupoy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 17 g/10min ISO 1133
Temperature 300 °C -
Load 1.2 kg -
Molding shrinkage, parallel 0.7 % ISO 294-4, 2577
Molding shrinkage, normal 0.8 % ISO 294-4, 2577
ASTM Data
Melt Flow Index, MFI 17 g/10min ASTM D 1238
Temperature 300 °C -
Load 1.2 kg -
Mold Shrinkage, MD 0.007 mm/mm ASTM D 955
Mold Shrinkage, TD 0.008 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 2100 MPa ISO 527
Yield stress 58 MPa ISO 527
Yield strain 6 % ISO 527
Stress at break 62 MPa ISO 527
Strain at break 100 % ISO 527
Flexural modulus, 23°C 2200 MPa ISO 178
Flexural strength 89 MPa ISO 178
Charpy notched impact strength, +23°C 20[1] kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 10[1] kJ/m² ISO 179/1eA
Izod notched impact strength, +23°C 17[1] kJ/m² ISO 180/1A
Izod notched impact strength 8[1] kJ/m² ISO 180/1A
Temperature -30 °C -
Rockwell hardness R 115 - ISO 2039-2
ASTM Data
Tensile Modulus 2203 MPa ASTM D 638
Tensile Strength at Yield 60.8 MPa ASTM D 638
Tensile Strength at Break 62.8 MPa ASTM D 638
Elongation at Yield 6 % ASTM D 638
Elongation at Break 110 % ASTM D 638
Flexural Modulus 2178 MPa ASTM D 790
Flexural Strength 100 MPa ASTM D 790
Rockwell Hardness R 115 - ASTM D 785
Izod Impact notched, 1/8 in 716 J/m ASTM D 256
Izod Impact notched, 1/4 in 108 J/m ASTM D 256
Izod Impact notched, Low-Temperature 98 J/m ASTM D 256
Temperature -30 °C -
1: 4 mm
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 120[2] °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 134[2] °C ISO 75-1/-2
Vicat softening temperature, B 137 °C ISO 306
Coeff. of linear therm. expansion, parallel 74 E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 72 E-6/K ISO 11359-1/-2
Burning behav. at thickness h V-0 class IEC 60695-11-10
Thickness tested 1.0 mm -
Burning behav. 5V at thickness h 5VB class IEC 60695-11-20
Thickness tested 1.7 mm -
ASTM Data
UL 94 Flame rating V-0 - UL 94
Thickness tested 1 mm -
Coefficient of Thermal Expansion, MD 74 E-6/K ASTM D 696
Coefficient of Thermal Expansion, TD 72 E-6/K ASTM D 696
DTUL @ 66 psi 136 °C ASTM D 648
DTUL @ 264 psi 123 °C ASTM D 648
Vicat Temperature 141 °C ASTM D 1525
2: 4 mm
Electrical propertiesValueUnitTest Standard
ISO Data
Volume resistivity 1E15 Ohm*m IEC 62631-3-1
Surface resistivity 1E15 Ohm IEC 62631-3-2
Comparative tracking index 212 - IEC 60112
ASTM Data
Dielectric Strength, Short Time 20 kV/mm ASTM D 149
Surface Resistivity 1E15 Ohm ASTM D 257
Volume Resistivity 1E17 Ohm*cm ASTM D 257
Other propertiesValueUnitTest Standard
Humidity absorption 0.2 % Sim. to ISO 62
Density 1180 kg/m³ ISO 1183
Density 1180 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 100 - 120 °C -
Pre-drying - Time 3 - 5 h -
Processing humidity ≤0.02 % -
Melt temperature 255 - 285 °C -
Mold temperature 40 - 80 °C -
Zone 1 240 - 250 °C -
Zone 2 250 - 280 °C -
Zone 3 250 - 280 °C -
Nozzle temperature 250 - 280 °C -
Characteristics
Processing
Injection Molding
Special Characteristics
Flame retardant, Halogen-free
Applications
Automotive, Electrical and Electronical, General Purpose
Regional Availability
North America, Europe, Asia Pacific, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.