Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUPOX SV1120M - PBT - LG Chem

Material Data Center offers the following functions for LUPOX SV1120M:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lupox datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 10 g/10min ASTM D 1238
Temperature 250 °C -
Load 2.16 kg -
Mold Shrinkage, MD 0.0195 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Strength at Yield 54 MPa ASTM D 638
Tensile Strength at Break 47.1 MPa ASTM D 638
Elongation at Break 200 % ASTM D 638
Flexural Modulus 2453 MPa ASTM D 790
Flexural Strength 83.4 MPa ASTM D 790
Izod Impact notched, 1/8 in 37.7 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ASTM Data
DTUL @ 66 psi 154 °C ASTM D 648
DTUL @ 264 psi 57 °C ASTM D 648
Melting Temperature 225 °C ASTM D 3418
Other propertiesValueUnitTest Standard
Water Absorption, 24hr 0.08 % ASTM D 570
Density 1310 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 100 - 120 °C -
Pre-drying - Time 3 - 5 h -
Processing humidity ≤0.02 % -
Melt temperature 225 °C -
Mold temperature 40 - 80 °C -
Zone 1 230 - 240 °C -
Zone 2 240 - 250 °C -
Zone 3 250 - 260 °C -
Nozzle temperature 250 - 260 °C -
Processing Recommendation ExtrusionValueUnitTest Standard
Pre-drying - Temperature 100 - 120 °C -
Pre-drying - Time 3 - 5 h -
Processing humidity ≤0.02 % -
Melt temperature 225 °C -
Zone 1 230 - 240 °C -
Zone 2 240 - 250 °C -
Zone 3 250 - 260 °C -
Zone 4 250 - 260 °C -
Nozzle temperature 250 - 260 °C -
Characteristics
Processing
Injection Molding, Film Extrusion, Sheet Extrusion, Other Extrusion
Applications
General Purpose
Regional Availability
North America, Europe, Asia Pacific, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.