Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Lexan 4704 - PC - SABIC Innovative Plastics

Material Data Center offers the following functions for Lexan 4704:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index 2 g/10min ASTM D 1238
Mold Shrinkage, MD 0.009 mm/mm ASTM D 955
Density, 73°F 1200 kg/m³ ASTM D 792
Water Absorption, 24hr 0.19 % ASTM D 570
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Modulus 2075.32 MPa ASTM D 638
Tensile Strength at Yield 64.8 MPa ASTM D 638
Tensile Strength at Break 77.2 MPa ASTM D 638
Elongation at Yield 8 % ASTM D 638
Elongation at Break 78 % ASTM D 638
Flexural Modulus 2323.53 MPa ASTM D 790
Flexural Strength 96.5 MPa ASTM D 790
Rockwell Hardness R 127 - ASTM D 785
Izod Impact notched, 1/8 in 0.374 kJ/m ASTM D 256
Izod Impact notched, Low-Temperature 0.0801 kJ/m ASTM D 256
Temperature -30 °C ASTM D 256
Thermal propertiesValueUnitTest Standard
ASTM Data
UL 94 Flame rating HB - UL 94
Thickness tested 1.47 mm -
Coefficient of Thermal Expansion, MD 59.9 E-6/K ASTM D 696
Coefficient of Thermal Expansion, TD 59.9 E-6/K ASTM D 696
DTUL @ 264 psi 149 °C ASTM D 648
Vicat Temperature 173 °C ASTM D 1525
Thermal Conductivity, melt state 0.21 W/(m K) ASTM C 177
Specific Heat 798 J/(kg K) ASTM C 351
Electrical propertiesValueUnitTest Standard
ASTM Data
Dielectric Strength, Short Time 20 kV/mm ASTM D 149
Dissipation Factor, 60 Hz 0.0016 - ASTM D 150
Dielectric Constant, 60 Hz 3.17 - ASTM D 150
Dielectric Constant, 1 MHz 3.1 - ASTM D 150
Volume Resistivity >1E15 Ohm*cm ASTM D 257
Arc Resistance 90 s ASTM D 495
Optical propertiesValueUnitTest Standard
ASTM Data
Haze 1 % ASTM D 1003
Light Transmittance 85 % ASTM D 1003
Index of Refraction 1.6 - ASTM D 542
Characteristics
Processing
Injection Molding
Special Characteristics
Heat stabilized or stable to heat
Ecological valuation
Food approval FDA 21 CFR
Regional Availability
North America, Europe, Asia Pacific, Near East/Africa
Disclaimer
Copyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: 2014-09-02 Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.