Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ VISUALFX™ Resin FXE1414L - Americas - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ VISUALFX™ Resin FXE1414L - Americas:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
Opaque EXL, UV-Stabilized & light shielding capability (Wall thickness >0.8mm), for portable electronics device enclosure application. Only available in white, grey and limited pastel colors. Consult CIC or PM for color availability & limitation.

UL Yellow Card Link E207780-642296
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 10 cm³/10min ISO 1133
Temperature 300 °C -
Load 1.2 kg -
ASTM Data
Melt Flow Index, MFI 11 g/10min ASTM D 1238
Temperature 300 °C -
Load 1.2 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 2000 MPa ISO 527
Yield stress 52 MPa ISO 527
Yield strain 5 % ISO 527
Stress at break 47 MPa ISO 527
Strain at break 50 % ISO 527
Flexural modulus 2110 MPa ISO 178
Charpy notched impact strength, +23°C 55 kJ/m² ISO 179/1eA
Izod notched impact strength, +23°C, 4mm 56 kJ/m² ISO 180/1A
Izod notched impact strength, -30°C, 4mm 46 kJ/m² ISO 180/1A
ASTM Data
Tensile Modulus 2030 MPa ASTM D 638
Tensile Strength at Yield 52 MPa ASTM D 638
Tensile Strength at Break 54 MPa ASTM D 638
Elongation at Yield 5 % ASTM D 638
Elongation at Break 84 % ASTM D 638
Flexural Modulus 2050 MPa ASTM D 790
Izod Impact notched, 1/8 in 766 J/m ASTM D 256
Izod Impact notched, Low-Temperature 640 J/m ASTM D 256
Temperature -30 °C -
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 118 °C ISO 75-1/-2
Vicat softening temperature, B 138 °C ISO 306
Vicat softening temperature, 120°C/h 50N 146 °C ISO 306
Burning behav. at thickness h HB class IEC 60695-11-10
Thickness tested 0.4 mm -
ASTM Data
DTUL @ 264 psi 121 °C ASTM D 648
Vicat Temperature 138 °C ASTM D 1525
Other propertiesValueUnitTest Standard
Water absorption 0.17 % Sim. to ISO 62
Humidity absorption 0.07 % Sim. to ISO 62
Density 1280 kg/m³ ISO 1183
Density 1280 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 120 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.02 % -
Melt temperature 295 - 315 °C -
Mold temperature 70 - 95 °C -
Feed temperature 60 - 80 °C -
Zone 1 260 - 280 °C -
Zone 2 280 - 305 °C -
Zone 3 295 - 315 °C -
Characteristics
Processing
Injection Molding
Applications
Automotive
Regional Availability
North America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.