Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ VISUALFX™ Resin FXE121R Asia - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ VISUALFX™ Resin FXE121R Asia:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
Transparent PC.  ILLUMINATE special effects (fluorescent/edge glow colors).  MFR 18.2.  Internal mold release.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 18.2 g/10min ASTM D 1238
Temperature 300 °C -
Load 1.2 kg -
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Modulus 2170 MPa ASTM D 638
Tensile Strength at Yield 62 MPa ASTM D 638
Tensile Strength at Break 68 MPa ASTM D 638
Elongation at Yield 7 % ASTM D 638
Elongation at Break 125 % ASTM D 638
Flexural Modulus 2340 MPa ASTM D 790
Izod Impact notched, 1/8 in 747 J/m ASTM D 256
Izod Impact unnotched, 1/8 in 3200 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Burning behav. at thickness h HB class IEC 60695-11-10
Thickness tested 0.7 mm -
Yellow Card available yes - -
ASTM Data
DTUL @ 66 psi 137 °C ASTM D 648
DTUL @ 264 psi 126 °C ASTM D 648
Vicat Temperature 154 °C ASTM D 1525
Electrical propertiesValueUnitTest Standard
ISO Data
Comparative tracking index 325 - IEC 60112
Other propertiesValueUnitTest Standard
Density 1200 kg/m³ ASTM D 792
Characteristics
Processing
Injection Molding
Additives
Release agent
Special Characteristics
Transparent
Applications
Automotive, Electrical and Electronical
Regional Availability
Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.