Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ VISUALFX™ Resin FXD9332T - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ VISUALFX™ Resin FXD9332T:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Product Texts
LEXAN FXD9332T  is based on Polycarbonate (PC) siloxane copolymer resin. It is a flame-retardant and UV stabilized resin suitable for extrusion. This resin is available in a single translucent color and enables a medium fine surface texture when extruded in sheet, pipe and profiles. This flame retardant resin is EN45545 R4 compliant and is targeted for train lighting cover applications (category R4).
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 7 cm³/10min ISO 1133
Temperature 300 °C -
Load 2.16 kg -
Molding shrinkage, parallel 0.7 % ISO 294-4, 2577
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 2450 MPa ISO 527
Yield stress 70 MPa ISO 527
Yield strain 6 % ISO 527
Stress at break 55 MPa ISO 527
Strain at break >50 % ISO 527
Flexural modulus, 23°C 2400 MPa ISO 178
Charpy impact strength, +23°C N kJ/m² ISO 179/1eU
Charpy impact strength, -30°C 100 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 5 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 4 kJ/m² ISO 179/1eA
Izod impact strength, +23°C N kJ/m² ISO 180/1U
Izod notched impact strength, +23°C 6 kJ/m² ISO 180/1A
Izod notched impact strength 5 kJ/m² ISO 180/1A
Temperature -30 °C -
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 120 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 131 °C ISO 75-1/-2
Vicat softening temperature, B 136 °C ISO 306
Oxygen index 36 % ISO 4589-1/-2
Other propertiesValueUnitTest Standard
Density 1250 kg/m³ ISO 1183
Processing Recommendation ExtrusionValueUnitTest Standard
Pre-drying - Temperature 120 °C -
Pre-drying - Time 2 - 4 h -
Melt temperature 260 - 300 °C -
Zone 1 260 - 300 °C -
Zone 2 260 - 290 °C -
Zone 3 260 - 290 °C -
Nozzle temperature 240 - 280 °C -
Characteristics
Processing
Pipe/Tube Extrusion, Profile Extrusion, Sheet Extrusion
Special Characteristics
Flame retardant, U.V. stabilized or stable to weather, Translucent
Features
Copolymer
Applications
Electrical and Electronical
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.