Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ VISUALFX™ Resin FXC630SK - Asia - (PC+ABS) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ VISUALFX™ Resin FXC630SK - Asia:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
PC+ABS, ECO-conforming flame retardant with diamond sparkle appearance. Color package may affect performance.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 14 cm³/10min ISO 1133
Temperature 260 °C -
Load 2.16 kg -
ASTM Data
Melt Flow Index, MFI 13.5 g/10min ASTM D 1238
Temperature 260 °C -
Load 2.16 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 2800 MPa ISO 527
Yield stress 60 MPa ISO 527
Yield strain 3 % ISO 527
Stress at break 45 MPa ISO 527
Strain at break 7 % ISO 527
Flexural modulus, 23°C 2600 MPa ISO 178
Izod notched impact strength, +23°C 14 kJ/m² ISO 180/1A
ASTM Data
Tensile Modulus 3100 MPa ASTM D 638
Tensile Strength at Yield 59 MPa ASTM D 638
Tensile Strength at Break 46 MPa ASTM D 638
Elongation at Yield 4 % ASTM D 638
Elongation at Break 20 % ASTM D 638
Flexural Modulus 2680 MPa ASTM D 790
Izod Impact notched, 1/8 in 213 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Vicat softening temperature, B 95 °C ISO 306
Burning behav. at 1.5 mm nom. thickn. V-0 class IEC 60695-11-10
Thickness tested 1.5 mm -
Yellow Card available yes - -
Burning behav. at thickness h V-2 class IEC 60695-11-10
Thickness tested 1.0 mm -
Yellow Card available yes - -
Burning behav. 5V at thickness h 5VB class IEC 60695-11-20
Thickness tested 2.0 mm -
Yellow Card available yes - -
ASTM Data
Coefficient of Thermal Expansion, MD 72 E-6/K ASTM D 696
Coefficient of Thermal Expansion, TD 72 E-6/K ASTM D 696
DTUL @ 66 psi 90 °C ASTM D 648
DTUL @ 264 psi 82 °C ASTM D 648
Vicat Temperature 98 °C ASTM D 1525
Other propertiesValueUnitTest Standard
Density 1200 kg/m³ ISO 1183
Density 1190 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 80 - 90 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.04 % -
Melt temperature 245 - 275 °C -
Mold temperature 60 - 80 °C -
Zone 1 220 - 255 °C -
Zone 2 220 - 265 °C -
Zone 3 245 - 275 °C -
Nozzle temperature 245 - 275 °C -
Screw speed 40 - 70 rpm -
Back pressure 0.3 - 0.7 MPa -
Characteristics
Processing
Injection Molding
Special Characteristics
Flame retardant
Certifications
Food contact
Applications
Electrical and Electronical, Packaging
Regional Availability
Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.