Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ FR Resin SLDM2005 - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ FR Resin SLDM2005:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
LEXAN SLDM2005 compound is based on Polycarbonate / Polyester blend containing proprietary fillers. Added features of this grade include: Permanently Anti-Static, Non-Halogenated Flame Retardant

UL Yellow Card Link E207780-228455
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 17 g/10min ASTM D 1238
Temperature 260 °C -
Load 2.16 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 2600 MPa ISO 527
Yield stress 53 MPa ISO 527
Yield strain 4 % ISO 527
Stress at break 46 MPa ISO 527
Strain at break 46 % ISO 527
Flexural modulus 2630 MPa ISO 178
ASTM Data
Tensile Modulus 2830 MPa ASTM D 638
Tensile Strength at Yield 54 MPa ASTM D 638
Tensile Strength at Break 46 MPa ASTM D 638
Elongation at Yield 4 % ASTM D 638
Elongation at Break 72 % ASTM D 638
Flexural Modulus 2350 MPa ASTM D 790
Izod Impact notched, 1/8 in 294 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Burning behav. at thickness h V-2 class IEC 60695-11-10
Thickness tested 2.0 mm -
ASTM Data
DTUL @ 264 psi 99 °C ASTM D 648
Electrical propertiesValueUnitTest Standard
ASTM Data
Surface Resistivity 5E12 Ohm ASTM D 257
Other propertiesValueUnitTest Standard
Water absorption 0.6 % Sim. to ISO 62
Humidity absorption 0.03 % Sim. to ISO 62
Density 1250 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 90 - 100 °C -
Pre-drying - Time 4 - 6 h -
Processing humidity ≤0.04 % -
Melt temperature 240 - 260 °C -
Mold temperature 30 - 70 °C -
Zone 1 220 - 245 °C -
Zone 2 220 - 255 °C -
Zone 3 230 - 260 °C -
Screw speed 40 - 70 rpm -
Back pressure 0.3 - 0.7 MPa -
Characteristics
Processing
Injection Molding
Additives
Flame retarding agent
Special Characteristics
Flame retardant
Regional Availability
North America, Europe, Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.