Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ FR Resin SLD3000 - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ FR Resin SLD3000:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
Antistatic colorable/opaque FR PC grade

UL Yellow Card Link E207780-228454
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 19 g/10min ASTM D 1238
Temperature 260 °C -
Load 2.16 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Strain at break 50 % ISO 527
ASTM Data
Tensile Strength at Yield 52 MPa ASTM D 638
Flexural Modulus 2030 MPa ASTM D 790
Izod Impact notched, 1/8 in 700 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Burning behav. at thickness h V-2 class IEC 60695-11-10
Thickness tested 1.0 mm -
Electrical propertiesValueUnitTest Standard
ASTM Data
Surface Resistivity 1.2E12 Ohm ASTM D 257
Other propertiesValueUnitTest Standard
Density 1210 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 90 - 100 °C -
Pre-drying - Time 4 - 6 h -
Processing humidity ≤0.04 % -
Melt temperature 240 - 260 °C -
Mold temperature 30 - 70 °C -
Zone 1 220 - 245 °C -
Zone 2 220 - 255 °C -
Zone 3 230 - 260 °C -
Screw speed 40 - 70 rpm -
Back pressure 0.3 - 0.7 MPa -
Characteristics
Processing
Injection Molding
Regional Availability
North America, Europe, Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.