Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ FR Resin DMX1214 - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ FR Resin DMX1214:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Optical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
LEXAN DMX1214 is a standard flow Polycarbonate (PC) copolymer resin. Available in both transparent and custom colours, this grade is a good candidate for 5G related devices. Added features of this grade include: Improved Scratch Resistance and Improved Dielectric Performance (lower Df).
UL Yellow Card E121562-613857
UL Yellow Card E45329-100081386
UL Yellow Card E207780-100081391
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 16 cm³/10min ISO 1133
Temperature 300 °C -
Load 1.2 kg -
ASTM Data
Melt Flow Index, MFI 17.1 g/10min ASTM D 1238
Temperature 300 °C -
Load 1.2 kg -
Mold Shrinkage, MD 0.0065 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 2400 MPa ISO 527
Yield stress 77 MPa ISO 527
Yield strain 8 % ISO 527
Stress at break 62 MPa ISO 527
Strain at break 60 % ISO 527
Flexural modulus, 23°C 2310 MPa ISO 178
Flexural strength 101 MPa ISO 178
Charpy impact strength, +23°C N kJ/m² ISO 179/1eU
Charpy impact strength, -30°C 133 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 3 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 3 kJ/m² ISO 179/1eA
Izod impact strength, +23°C N kJ/m² ISO 180/1U
Izod notched impact strength, +23°C 6 kJ/m² ISO 180/1A
Izod notched impact strength 4 kJ/m² ISO 180/1A
Temperature -30 °C -
ASTM Data
Tensile Modulus 2830 MPa ASTM D 638
Tensile Strength at Yield 77 MPa ASTM D 638
Tensile Strength at Break 64 MPa ASTM D 638
Elongation at Yield 7 % ASTM D 638
Elongation at Break 92 % ASTM D 638
Flexural Modulus 2630 MPa ASTM D 790
Flexural Strength 116 MPa ASTM D 790
Izod Impact notched, 1/8 in 37 J/m ASTM D 256
Izod Impact notched, Low-Temperature 32 J/m ASTM D 256
Temperature -30 °C -
Izod Impact unnotched, 1/8 in N J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 121 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 134 °C ISO 75-1/-2
Vicat softening temperature, B 141 °C ISO 306
Coeff. of linear therm. expansion, parallel 60 E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 60 E-6/K ISO 11359-1/-2
ASTM Data
UL 94 Flame rating HB - UL 94
Thickness tested 0.75 mm -
Coefficient of Thermal Expansion, MD 60 E-6/K ASTM D 696
Coefficient of Thermal Expansion, TD 60 E-6/K ASTM D 696
DTUL @ 66 psi 133 °C ASTM D 648
DTUL @ 264 psi 121 °C ASTM D 648
Vicat Temperature 138 °C ASTM D 1525
Optical propertiesValueUnitTest Standard
ASTM Data
Haze 0.8 % ASTM D 1003
Light Transmittance 88 % ASTM D 1003
Index of Refraction 1.58 - ASTM D 542
Other propertiesValueUnitTest Standard
Water absorption 0.3 % Sim. to ISO 62
Humidity absorption 0.14 % Sim. to ISO 62
Density 1170 kg/m³ ISO 1183
Water Absorption, 24hr 0.1 % ASTM D 570
Water Absorption, Equilibrium 0.14 % ASTM D 570
Density 1170 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 120 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.02 % -
Melt temperature 295 - 315 °C -
Mold temperature 70 - 95 °C -
Feed temperature 60 - 80 °C -
Zone 1 260 - 280 °C -
Zone 2 280 - 305 °C -
Zone 3 295 - 315 °C -
Nozzle temperature 290 - 310 °C -
Characteristics
Processing
Injection Molding
Special Characteristics
Transparent
Features
Scratch Resistant, Copolymer
Applications
Automotive, IT / Business Machine, Electrical and Electronical, Medical
Regional Availability
North America, Europe, Asia Pacific, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.