Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ Copolymer ML7664 - Asia - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ Copolymer ML7664 - Asia:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
LEXAN ML7664 polycarbonate (PC) siloxane resin, is a product targeting (profile) extrusion applications requiring extreme low temperature ductility. LEXAN ML7664 resin is a non-FR product available in opaque colors only.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 2 cm³/10min ISO 1133
Temperature 300 °C -
Load 1.2 kg -
ASTM Data
Melt Flow Index, MFI 2.7 g/10min ASTM D 1238
Temperature 300 °C -
Load 1.2 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 2300 MPa ISO 527
Yield stress 59 MPa ISO 527
Yield strain 6 % ISO 527
Stress at break 59 MPa ISO 527
Strain at break 50 % ISO 527
Flexural modulus 2100 MPa ISO 178
Charpy notched impact strength, +23°C 77 kJ/m² ISO 179/1eA
Izod notched impact strength, +23°C, 4mm 64 kJ/m² ISO 180/1A
Izod notched impact strength, -30°C, 4mm 54 kJ/m² ISO 180/1A
ASTM Data
Tensile Modulus 2200 MPa ASTM D 638
Tensile Strength at Yield 60 MPa ASTM D 638
Tensile Strength at Break 56 MPa ASTM D 638
Elongation at Yield 6 % ASTM D 638
Elongation at Break 86 % ASTM D 638
Flexural Modulus 2300 MPa ASTM D 790
Izod Impact notched, 1/8 in 847 J/m ASTM D 256
Izod Impact notched, Low-Temperature 710 J/m ASTM D 256
Temperature -30 °C -
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 125 °C ISO 75-1/-2
Vicat softening temperature, B 143 °C ISO 306
Vicat softening temperature, 120°C/h 50N 145 °C ISO 306
ASTM Data
DTUL @ 264 psi 127 °C ASTM D 648
Vicat Temperature 144 °C ASTM D 1525
Other propertiesValueUnitTest Standard
Water absorption 0.35 % Sim. to ISO 62
Humidity absorption 0.15 % Sim. to ISO 62
Density 1190 kg/m³ ISO 1183
Density 1190 kg/m³ ASTM D 792
Characteristics
Processing
Profile Extrusion
Regional Availability
Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.