Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Kynar Flex® 2850-07 - PVDF - ARKEMA

Material Data Center offers the following functions for Kynar Flex® 2850-07:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Kynar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
Kynar Flex® resins are fluorinated thermoplastic copolymers.

Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties.

Kynar Flex® 2850-07 resin is a moderate viscosity version of Kynar Flex® 2850-00 resin in for ease of extrusion and co-extrusion. 

It has a UL RTI temperature rating of 140 degrees C. 

UL Yellow Card


Main applications:
  • injection molded applications requiring the high chemical and temperature resistance properties of Kynar 2850-00 resin
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 1300 MPa ISO 527
Yield stress 40 MPa ISO 527
Yield strain 11 % ISO 527
Nominal strain at break >50 % ISO 527
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 157 °C ISO 11357-1/-3
Burning Behav. at 1.5 mm nom. thickn. V-0 class IEC 60695-11-10
Thickness tested 1.5 mm -
Yellow Card available yes - -
Burning Behav. at thickness h V-0 class IEC 60695-11-10
Thickness tested 0.8 mm -
Electrical propertiesValueUnitTest Standard
ISO Data
Relative permittivity, 100Hz 6.85 - IEC 62631-2-1
Dissipation factor, 100Hz 0.12 E-4 IEC 62631-2-1
Volume resistivity 2E12 Ohm*m IEC 62631-3-1
Electric strength 1.4 kV/mm IEC 60243-1
Other propertiesValueUnitTest Standard
Water absorption 0.03 % Sim. to ISO 62
Density 1770 kg/m³ ISO 1183
Characteristics
Features
Copolymer
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.