Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of KOPLA® KDE1010 - PA66 - KOPLA CO., LTD

Material Data Center offers the following functions for KOPLA® KDE1010:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Kopla datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Mold Shrinkage, MD 0.0215 mm/mm ASTM D 955
Mold Shrinkage, TD 0.0245 mm/mm ASTM D 955
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Tensile Modulus 2300 / 950 MPa ISO 527
Tensile Strength 64 / 47 MPa ISO 527
Flexural strength 82 / 30 MPa ISO 178
Charpy impact strength, +23°C N / N kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 21 / 50 kJ/m² ISO 179/1eA
Rockwell hardness R 112 - ISO 2039-2
ASTM Data
Tensile Modulus 2300 / 950 MPa ASTM D 638
Tensile Strength 64 / 47 MPa ASTM D 638
Flexural Modulus 2100 / 800 MPa ASTM D 790
Flexural Strength 82 / 30 MPa ASTM D 790
Rockwell Hardness R 112 / - ASTM D 785
Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature, 10°C/min 260 / * °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 70 / * °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 230 / * °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 70 / * E-6/K ISO 11359-1/-2
Burning behav. at thickness h HB / * class IEC 60695-11-10
ASTM Data
UL 94 Flame rating HB - UL 94
Coefficient of Thermal Expansion, MD 70 E-6/K ASTM D 696
DTUL @ 66 psi 230 °C ASTM D 648
DTUL @ 264 psi 70 °C ASTM D 648
Melting Temperature 260 °C ASTM D 3418
Electrical propertiesdry / condUnitTest Standard
ISO Data
Relative permittivity, 1MHz 3 / - - IEC 62631-2-1
Dissipation factor, 1MHz 0.02 / - E-4 IEC 62631-2-1
Volume resistivity 1E14 / - Ohm*m IEC 62631-3-1
Electric strength 32 / - kV/mm IEC 60243-1
ASTM Data
Dielectric Strength, Short Time 32 / - kV/mm ASTM D 149
Dissipation Factor, 1 MHz 0.02 / - - ASTM D 150
Dielectric Constant, 1 MHz 3 / - - ASTM D 150
Volume Resistivity 1E14 / - Ohm*cm ASTM D 257
Other propertiesdry / condUnitTest Standard
Density 1090 / - kg/m³ ISO 1183
Water Absorption, 24hr 1.3 % ASTM D 570
Density 1090 kg/m³ ASTM D 792
Characteristics
Special Characteristics
High impact or impact modified
Applications
Automotive
Regional Availability
North America, Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.