Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of KEYFLEX TO1192A - TPV - LG Chem

Material Data Center offers the following functions for KEYFLEX TO1192A:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Keyflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 20 g/10min ASTM D 1238
Temperature 230 °C -
Load 10 kg -
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Strength at Break 9.81 MPa ASTM D 638
Elongation at Break 700 % ASTM D 638
Shore A Hardness 92 - ASTM D 2240
Tear Strength 54 kN/m ASTM D 624
Izod Impact notched, 1/4 in N J/m ASTM D 256
Izod Impact notched, Low-Temperature N J/m ASTM D 256
Temperature -40 °C -
Other propertiesValueUnitTest Standard
Density 930 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 60 - 90 °C -
Pre-drying - Time 3 - 4 h -
Melt temperature 200 - 240 °C -
Mold temperature 40 - 60 °C -
Zone 1 180 - 200 °C -
Zone 2 180 - 220 °C -
Zone 3 200 - 230 °C -
Screw speed 30 - 60 rpm -
Back pressure 30 - 60 MPa -
Characteristics
Processing
Calandering
Features
Soft Feel
Applications
Automotive, General Purpose
Regional Availability
North America, Europe, Asia Pacific, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.