Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Inzea® F29 HT 30 - (PLA+PSAC) - Nurel S.A.

Material Data Center offers the following functions for Inzea® F29 HT 30:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Inzea datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 4700 MPa ISO 527
Tensile Strength 48 MPa ISO 527
Yield strain 3 % ISO 527
Strain at break 5 % ISO 527
Flexural modulus, 23°C 5000 MPa ISO 178
Charpy notched impact strength, +23°C 6.5 kJ/m² ISO 179/1eA
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 177 °C ISO 11357-1/-3
Temp. of deflection under load, 0.45 MPa 62 °C ISO 75-1/-2
Other propertiesValueUnitTest Standard
Biobased content 80 % -
Moisture Content 1 % -
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 50 °C -
Melt temperature 200 - 210 °C -
Mold temperature 100 - 120 °C -
Characteristics
Processing
Injection Molding, Blow Molding
Special Characteristics
Heat stabilized or stable to heat
Certifications
Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable ISO 13432 (Producer), Compostable ISO 13432 (Certificate)
Regional Availability
Europe, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.